- 160 -∫ Simultaneous recordingSame motion picture can be recorded on two SD cards.≥ is displayed beside the display of the SD card selected as the recording destination ofmotion pictures in [MEDIA SELECT] (l 32).≥ If you set the recording destination of motion pictures to [SD CARD 1] in [MEDIA SELECT], theywill also be recorded to [SD CARD 2] simultaneously.≥ We recommend that you perform simultaneous recording using SD cards of the same SpeedClass rating and capacity.∫ Background recordingYou can continue recording a motion picture by recording it on the SD card that is not set as arecording destination in [MEDIA SELECT] (l 32).≥ When the recording destination of motion pictures is set to [SD CARD 1] in [MEDIA SELECT],[SD CARD 2] will be used for background recording. The following instructions assume that therecording destination of motion pictures is set to [SD CARD 1].≥ is displayed beside the SD card display for card 2.How to use background recording≥ Register [BACKGROUND] to a USER button. (l 74)1 Press the recording start/stop button to start recording.≥ A motion picture will start being recorded to the two SD cards. ( will be displayed in red.)≥ If you press the USER button to which [BACKGROUND] is registered, you can start recordingonly to the SD card in card slot 2.≥ For information on how to register a function to USER buttons, refer to page 74. For informationon how to use the USER button to which [BACKGROUND] is registered, refer to page 85.2 Press the recording start/stop button again to stop recording.≥ Recording to the SD card in card slot 1 will stop, but recording to the SD card in card slot 2 willcontinue.≥ You can repeat recording to the SD card in card slot 1 by pressing the recording start/stop button.≥ You can stop background recording by pressing and holding the USER button to which[BACKGROUND] is registered.∫ Dual codec recordingYou can make main and sub recordings in separate [REC FORMAT] settings.Sub recording records scenes in a picture quality lower than that of the [REC FORMAT] setting formain recording.≥ If you set the recording destination of motion picture to [SD CARD 1] in [MEDIA SELECT] (l 32),[SD CARD 1] will be used for main recording, while [SD CARD 2] will be used for sub recording.≥ Set the sub recording scene setting in [DUAL CODEC REC].≥ The icon for the card used for main recording will be displayed with or .SIMULBACKGRBACKGRDUAL 50M DUAL 8M