- 131 -Default scene number settings≥ This function’s default setting is [SCENE1].≥ It is possible to switch the scene file by touching to while displaying the operation icons.(l 97)≥ It will return to the default settings when [SCENE] is selected in [INITIAL SET]. (l 178)You can save the scene file settings of [CUSTOMIZE SCENE] to the SD card or load them from theSD card to this unit. (l 89)This enables/disables Variable Frame Rate Mode.In Variable Frame Rate Mode, you can record quick or slow motion picture by changing the framerate before recording.≥ For information on how to use Variable Frame Rate Mode, refer to page 91.≥ This function’s default setting is [OFF].You can adjust the frame rate for Variable Frame Rate Mode.≥ Set [VFR MODE] to [ON]. (l 91, above)1 Touch [FRAME RATE].2 Touch / to adjust the frame rate.≥ You can select a value between 2fps and 120fps.3 Touch [EXIT] to complete the setting.≥ When the default setting for [SYSTEM FREQ] is [59.94Hz]:This function’s default setting is “60fps”.When the default setting for [SYSTEM FREQ] is [50.00Hz]:This function’s default setting is “50fps”.≥ When [REC MODE] and [REC FORMAT] are set to settings that are not available for VariableFrame Rate Mode, [FRAME RATE] cannot be set. (l 91)≥ If you set the frame rate to 100fps or 120fps, the angle of view will change. (The color of the framerate value will change to blue.)[SCENE1] Setting appropriate for standard recording[SCENE2] Setting appropriate for recording considering the characteristic of fluorescent lamps(indoors, etc.)[SCENE3] Setting appropriate for recording with modulation in resolution, color shade, and contrast[SCENE4] Setting appropriate for recording with wider gradation in dark area (dusk, etc.)[SCENE5] Setting appropriate for recording as a cinema with high contrast[SCENE6] Setting appropriate for recording as a cinema with high dynamic range[SCENE FILE][LOAD]/[SAVE][VFR MODE][ON]/[OFF][FRAME RATE]SCN1 SCN6
