Panasonic AG-EZ50UP Operating Instructions Manual

Contents

321, 21, 14MULTI/P-IN-P1234ZOOMINDEX INDEXSELECTSTORESTOPK LºOSDCOUNTERV/REWSTILL ADVOFF/ONP.B.DIGITALDATE/TIMERESET TITLETWsVOLr´RECMULTI/P-IN-PPHOTOSHOTSTART/STOPVIDEO CAMERAA.DUBPLAYPAUSEFF/WSTILL ADVMENUITEMSET6 1 5;E DVAR.SEARCH P.B.ZOOM23MENUVOL/JOGPUSHBACKLIGHTª Playing Back with Multi-Picture ModeStrobe Multi-Picture Mode [STROBE] 1:You can capture 9 consecutive still pictures from playback video.Manual Multi-Picture Mode [MANUAL] 2:Selecting a desired still picture one at a time, you can capture 9 still pictures.Index Multi-Picture Mode ([PHOTO], [SCENE]) 3:You can capture 9 screens of pictures to which index signals have beenattached.After setting [EFFECT SELECT] on the [DIGITAL EFFECT] Sub-Menu to[MULTI].....1 Set [MULTI-PICTURES] >> [SCAN MODE] >> [STROBE],[MANUAL], [PHOTO] or [SCENE], whichever mode youprefer.When [STROBE] is selected:≥Set the [SPEED] to a desired strobe speed.[FAST]: You can capture 9 consecutive still pictures withinapproximately 1 second[NORMAL]: You can capture 9 consecutive still pictures withinapproximately 1.5 seconds[SLOW]: You can capture 9 consecutive still pictures withinapproximately 2 seconds≥If you set [SWING] on the [MULTI-PICTURES] Sub-Menu to [ON], theintervals at which the 9 still pictures are taken are longer at thebeginning and end than in the middle of the swing strobe period, and itis useful for analyzing swing motion, etc., in sports.2 Exit the Menu by pressing the [MENU] Button.3 Play back the tape.≥If you select Index mode, it is not necessary to play back the tape.4 Press the [MULTI] Button.≥If [STROBE] is selected: 9 screens are automatically captured startingat the point which the Button is pressed.≥If [MANUAL] is selected: press the [MULTI] Button at each scene youwant to capture. When 9 screens are captured, the tape will stop.≥If [PHOTO] or [SCENE] is selected: From the point at which theButton is pressed, 9 screens of pictures to which index signals areattached are captured in the playback direction. After 9 screens arecaptured, the tape will stop, but, if there are 8 or less pictures to becaptured, the tape will stop at its end.Deleting All the Captured Multi PicturesWhile displaying the multi-pictures that have been captured, press the[MULTI] Button.≥If [MANUAL] has been selected, press [MULTI] Button after 9 screens aredisplayed.To Display the Multi-pictures againPress the [MULTI] Button for 1 second or longer.To Delete Multi-pictures one by one(When Pictures have been captured in Manual Mode)When the [MULTI] Button is pressed for 1 second or longer while the stillpictures are displayed, the picture that was captured last is deleted. If youcontinue to press the Button, the pictures are deleted consecutively.≥After still pictures are deleted one at a time, they cannot be displayed again.To Stop Capturing Pictures midway (When Pictures have beencaptured in Index Mode)Press the [∫] Button.To Search the tape position of a desired picture among theplayback pictures displayed on 9 screens1 After displaying pictures in Multi-Picture Mode, rotate the[PUSH] Dial to select the image whose tape position youwant to search.≥The selected picture blinks at the red frame.2 Press Index Button [:] or [9] 4 on the Remotecontroller.≥A still picture playback takes place at the selected picture.≥For other notes, see page 48.