Panasonic AG-EZ50UP Operating Instructions Manual

Contents

7Quick Guide1 Charge the Battery. (l 12)≥Connect the AC Cable to the AC Adaptor and AC Jack.≥Attach the Battery to the AC Adaptor. (This will start the chargingprocess.)≥When the Charge Lamp [CHARGE] goes off, the Battery is fullycharged.≥Since the Battery will not be charged when the DC Cable is connectedto the AC Adaptor, disconnect it.2 Attach the Charged Battery to the Camera/Recorder. (l 12)≥Attach the battery after tilting the Viewfinder upward.3 Turn the Camera/Recorder on. (l 14)≥Slide the 1 Switch to [ON]. (The [CAMERA] Lamp lights up.)4 Insert the Cassette. (l 13)≥Slide the 2 Lever to the right and pull down to open the Cassettecompartment cover.≥Insert the Cassette.≥Press the [PUSH/TO CLOSE] 3 to load the Cassette.≥Close the lower compartment Cover.5 Start recording. (l 20)≥Press the 4 Button. (Recording starts.)≥Press the 4 Button again to pause the recording.To watch the Playback Picture6 Switch to the VCR Mode, rewind the tape, and play the tapeback. (l 28)≥Slide the 5 Switch. (The [VCR] Lamp lights up.)≥Press the 6 Button.≥Press the 7 Button. (This will start playback.)7 Turn the Camera/Recorder off. (l 14 )≥Set the 8 Switch to [OFF].SEARCHBACKLIGHT4CAMERACARD P.B.VCR2451CAMERACARD P.B.VCR8CAMERACARD P.B.VCRMODEONOFFPOWER5CAMERACARD P.B.VCRMODEONOFFPOWEROPEN / EJECT27636PUSHTO CLOSE31MODEONOFFPOWERMODEONOFFPOWER7