Panasonic AG-EZ50UP Operating Instructions Manual

Contents

372, 4, 5, 6, 7, 821)2)4)1)3)1 3PHOTOSHOTMENUVOL/JOGPUSHr1TITLEUSR00002.TTLTITLE152, 4MULTI/P-IN-P3, 46TAPE CARDPHOTOSHOTVOL/JOGPUSHCreating a TitleYou can create a title and record on a Memory Card.1 Camera Mode:Set the Lens to the image you want to use for creating a title.VCR Mode:Search for the image you want to use for creating a title andset the Camera/Recorder to Still Playback Mode.2 Set [CARD SETUP] >> [CREATE TITLE] >> [YES].3 Press the [PHOTO SHOT] Button.≥To perform Photoshot again, select [RETURN].4 Rotate the [PUSH] Dial to select [COLOR] and then press it.5 Rotate the [PUSH] Dial to select desired color and press it.6 Rotate the [PUSH] Dial to select [LUMINANCE] and press it.7 Rotate the [PUSH] Dial to adjust the title contrast and thenpress it.8 Select [RECORD] and then press the [PUSH] Dial.Selecting ColorsIf you make color selection by rotating the [PUSH] Dial when creating a title,you can change the color as follows.1) Original color (the color of the captured image)≥Title in the original color in which the dark portion (blackish portion) ofthe captured image is missing.2) Preset colors (black, blue, green, cyan, red, pink, yellow, and white)≥Title in a preset color in which the dark portion (blackish portion) of thecaptured image is missing.3) Original color (the color of the captured image)≥Title in the original color in which the bright portion (whitish portion) ofthe captured image is missing.4) Preset colors (black, blue, green, cyan, red, pink, yellow, and white)≥Title in a preset color in which the bright portion (whitish portion) of thecaptured image is missing.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Inserting a TitleYou can select one of your original titles and display it. (It can be displayed inCamera Mode, VCR Mode, and Card Playback Mode.)1 Press the [TITLE] Button.≥The title that was created last is displayed.2 Press [MULTI] Button.≥A list of titles is displayed.3 Rotate the [PUSH] Dial to select a desired title.≥The selected title is marked with a red frame.4 Press the [PUSH] Dial or the [MULTI] Button.≥The selected title is displayed.5 Using the [TAPE/CARD] Selector, select the recordingtarget.Camera Mode: TAPE or CARDVCR Mode: CARDCard Playback Mode: TAPE6 Press the [PHOTO SHOT] Button.≥A still picture is recorded under the inserted title.≥If you record on a Cassette in Normal Recording Mode, set the [TAPE/CARD] Selector to [TAPE] and press the Recording Start/Stop Button.1 File NameClearing a Title DisplayPress the [TITLE] Button.≥For other notes, see page 48.