Panasonic AG-HMC150P Operating Instructions Manual

Also see for AVCCAM AG-HMC150P: Operating instructions Parts list Quick start guide

Contents

Panasonic AG-HMC150P Operating Instructions Manual Manual pdf 23 page image

23Standby modeSettingHold down the STAND BY button for at least twoseconds while the power is on to activate thestandby mode setting. STD BY will be displayed onthe LCD monitor and the viewfinder.When this setting is activated, moving thePOWER switch to OFF will set the camera tostandby mode, and the mode lamp (CAM) willflash once every two seconds.The camera will be set to standby mode onlywhen the POWER switch is set to OFF duringCAM mode.STAND BY button■•••Canceling settingHold down the STAND BY button for at leasttwo seconds while the power is on to cancel thestandby mode setting. STD BY will be cease to bedisplayed on the LCD monitor or the viewfinder.Standby mode will be canceled in the followingcircumstances.If more than 30 minutes have elapsed since thepower was switched off.Battery is low.Battery has been removed.When the STAND BY button is pressed in thestandby mode, the mode lamp (CAM) will flashmore quickly and the standby mode will beextended by 30 minutes. It also flashes morequickly five minutes before the standby modeis canceled.During standby mode, the camera will stillconsume approximately 60% of the power itwould during paused recording, meaning thatavailable recording time will continue to bereduced even through the POWER switch isset to OFF.••■•···Tally lampThe tally lamp can be illuminated during recordingby setting the REC LAMP item of the OTHERFUNCTIONS screen (Page 98) to any setting otherthan OFF.The tally lamp will flash in any of the followingcircumstances.Receiving remote control operation(flashes 8 times per second)Recording error has occurred(flashes 4 times per second)Battery is low (flashes 4 times per second)Available SD Memory Card capacity is low(flashes 4 times per second)Optical Image Stabilizer function is not operatingcorrectly (flashes 4 times per second)Problem with focus function(flashes 4 times per second)Remaining battery capacity is low(flashes once per second)Remaining memory of the SD Memory Card islow (flashes once per second)••••••••Tally lampUSO RESTRITO