86Setup menu listSCENE FILE screenItem Displaymode Description of settingsCARD READ/WRITE(Camera) Reads and writes scene files on the SD Memory Card.READ: Reads scene files (all scenes, F1 to F6) saved on the SD Memory Cardafter setting values are selected.WRITE: Saves current scene file setting values (for all scenes, F1 to F6) on theSD Memory Card.NO: Returns to the last screen.LOAD/SAVE/INIT(Camera) LOAD: Loads the scene file settings which is saved by this camera.SAVE: Saves the changed scene file settings.INITIALIZE: The settings of the scene file selected with the SCENE FILE dialare returned to the factory settings.NO: Returns to the last screen.SYNCROSCAN(Camera) Adjusts the synchro scan shutter speed used for shooting images on a TVscreen, etc.Holding the Operation lever toward the or will cause the values to change ata faster rate.60P/60i:1/60.0
1/249.8 (Factory default setting is 1/48.0)30P:1/30.0
1/48.0
1/249.824P:1/24.0
1/48.0
1/249.8•••DETAIL LEVEL (Camera) Adjusts the level of the image outline correction (in the horizontal and verticaldirections).- 7
0
+ 7V DETAILLEVEL(Camera) Adjusts the level of outline correction in the vertical direction.- 7
0
+ 7DETAILCORING(Camera) Adjusts the level of noise reduction of the detail signal.- 7
0
+ 7Set to – for a clearer image. Noise increases slightly.Set to + to reduce noise.CHROMALEVEL(Camera) Adjusts the chroma level.- 7
0
+ 7CHROMAPHASE(Camera) Makes fine adjustments to the chroma phase.- 7
0
+ 7COLOR TEMPAch(Camera) Makes fine adjustments to the color temperature (after white balance Achadjustment).- 7
0
+ 7COLOR TEMPBch(Camera) Makes fine adjustments to the color temperature (after white balance Bchadjustment).- 7
0
+ 7MASTER PED (Camera) Adjusts the master pedestal (black level of the image) as the basis for images.- 100
0
+ 100A.IRIS LEVEL (Camera) Sets the desired AUTO IRIS level.- 10
0
+ 10indicates the factory setting.USO RESTRITO
