Panasonic AG-HMC150P Operating Instructions Manual

Also see for AVCCAM AG-HMC150P: Operating instructions Parts list Quick start guide

Contents

Panasonic AG-HMC150P Operating Instructions Manual Manual pdf 54 page image

54Uploading the metadata (META DATA)You can perform any of the following operations.If necessary, make preparations prior toundertaking the operations.Loading the metadataInsert the SD Memory Card on which themetadata is recorded into the unit. (For detailson contents of the metadata, see the previouspage.)Selecting whether to record the metadata onthe SD Memory CardInitializing the metadata inside the unitDisplaying the metadata inside the unit1 Press the mode button and select CAMmode.2 Press the MENU button.Menu operation (Page 82)3 Tilt the lever in the directions to selectMETA DATA, and push the Operation lever(or tilt in the direction).4 Tilt the Operation lever in the directionsto select item, and push the Operation lever.CARD READ:Read metadata set to the SD Memory Cardwith the camera.Move to LOAD, push the Operation lever,select whether or not to read the metadata(YES/NO), and push the Operation leveragain.•Up to 10 items of metadata on the SDMemory Card can be displayed, startingfrom the most recent date of production.If characters other than single-bytealphanumeric characters are used in themetadata file name to be loaded, they aredisplayed as “ ”.RECORD:The factory setting for this mode is OFF.USER CLIP NAME:The USER CLIP NAME recording method isselectable. Please refer to the next columnbelow.CLIP COUNT RESET:Reset the counter value to 1.Select whether or not to reset (YES/NO), andpush the Operation lever.META DATA PROP:Select this to display the metadata which hasbeen recorded in the unit.META INITIAL SET:Select this to initialize the metadata whichhas been recorded in the unit.Select YES to initialize the metadata or NOto cancel the initialization, and push theOperation lever.5 Press the MENU button to release the menumode.Selecting the USER CLIP NAMErecording methodPress the MENU button and select META DATA →USER CLIP NAME to select the recording method.Two options are available: TYPE1 and TYPE2.USER CLIP NAME to be recordedTYPE1 TYPE2If clip metadata hasbeen read inUploadeddataUploaded data+ COUNTvalueIf no clip metadatahas been read inor if the settingfor recording clipmetadata has beenturned offSequential 5-digit number,in order ofrecordingSequential 5-digit number,in order ofrecording··Clip metadata (continued)USO RESTRITO