Panasonic AG-HMR10 Operating Instructions Manual

Also see for AVCCAM AG-HMR10: Specifications User guide Specification sheet Brochure & specs Manual

Contents

Panasonic AG-HMR10 Operating Instructions Manual Manual pdf 32 page image

321 Press the portable recorder’s [POWER]button for 2 seconds or longer to turn onthe power. (Page 26)2 Press the [MENU] button.Using the setup menus (Page 29)3 Select [DISPLAY SETUP] → [LCD SET] →[YES], and then press the [ENTER] button.4 Press to select an item, and thenpress the [ENTER] button.LCD COLOR LEVEL: Adjusts the color density ofthe screen.LCD BRIGHTNESS: Adjusts the brightness of thescreen.LCD CONTRAST: Adjusts the contrast of thescreen.Be careful because if all the LCD monitor•adjustment values are set to their lowest levels, itbecomes difficult to see the menu screens.5 Press to set the item value, and thenpress the [ENTER] button.6 Press the [MENU] button to close the menu.Adjusting the LCD monitorSlight time errors may occur, so check that the•time is correct before recording.When using the recorder overseas, do not set•the [CLOCK SET] time to the local time, butinstead enter the time difference from GreenwichMean Time in [TIME ZONE]. (Page 92)Setting the date and time/Recharging the built-in battery/Adjusting the LCD monitor (continued)Recharging the built-in batteryThe recorder’s built-in battery saves the date andtime.When “LOW INTERNAL BATTERY” is displayedeven when the date and time are set, it meansthat the built-in battery is low. Recharge using thefollowing procedure.Reset the date and time after the battery is fullyrecharged.1 Connect the AC adapter to the portablerecorder. (Page 25)Leave off the power of the portable recorder.•2 Leave the portable recorder like this forabout 4 hours.The built-in battery recharges during this•time.Check the time code and menu operations•after recharging.If the date and time are still not memorized afterrecharging, the built-in battery must be replaced.Consult the place of purchase.