Recording51(Continued on the next page)SAdjusting the shutter speed1 Select [IRIS] → [AUTO2] or [MANUAL] in the[CAMERA SETUP] setup menu.Using the setup menus (Page 29)2 Press the [ENTER] button to displayS on the LCD monitor.S3 Press or to adjust the shutter speed.: Increases the shutter speed: Reduces the shutter speed1/60The current value isdisplayed on the LCDmonitor screen.Remember that the faster the shutter speed,•the lower the sensitivity.If [IRIS] → [AUTO2] in the [CAMERA•SETUP] setup menu is selected, the aperturewill open wider with higher shutter speedsand thereby reduce focal depth.It will take longer to focus when the•shutter speed has been reduced, so it isrecommended that the camera head besecured to a tripod, etc. for use.When [OTHER DISPLAY] → [ON] in the•[DISPLAY SETUP] setup menu is selected,the currently set shutter speed is displayedon the LCD monitor screen.With artificial lighting and especially•fluorescent lights and mercury-vapor lamps,the luminance changes in synchronizationwith the power line frequency. When thisfrequency is 50 Hz, mutual interferencewill occur between the portable recorder’svertical sync frequency (approx. 60 Hz)and the lighting frequency (50 Hz). Thismeans that the white balance may changeperiodically. Before shooting in areas withartificial lighting or adjusting the whitebalance, set the shutter speed with referenceto the following tables.When [SYSTEM FREQ] is set to [59.9Hz]Frame rate Shutter speed50 Hz 60 Hz60i 1/100 1/6030P 1/50 1/6024P 1/50 1/60When [SYSTEM FREQ] is set to [50Hz]Frame rate Shutter speed50 Hz 60 Hz50i 1/50 1/6025P 1/50 1/60
