Panasonic AG-HMR10 Operating Instructions Manual

Also see for AVCCAM AG-HMR10: Specifications User guide Specification sheet Brochure & specs Manual

Contents

Panasonic AG-HMR10 Operating Instructions Manual Manual pdf 88 page image

88Setup menu list (continued)DISPLAY SETUPItem Displaymode Description of settingsZEBRA CAM Sets the level of the zebra pattern that is displayed on the LCD monitor screen.OFF, 105%, 100%, 95%, 90%, 85%, 80%, 75%, 70%, 65%, 60%, 55%, 50%SAFETY ZONE CAM Sets the display method for the safety zone. (Page 75)90%, 4:3, OFFFOCUS BAR CAM Sets whether to display the focus assist bar.ON OFFSelect [ON] to display the focus assist bar.REC COUNTER SDI/CAM Selects the counter operation during recording.TOTAL: Continues counting until the counter is reset.CLIP: Resets the counter at the start of recording to count the recording timefor each clip.In PB mode, operation is always in CLIP mode.•OUTPUT OSD SDI/CAMPBON OFFSelect [ON] to output the information displayed on the LCD monitor screentogether with the video as a video output signal.DATE/TIME SDI/CAMPBSelects the date and time to display on the LCD monitor or overlay and output onthe video.TIME: Displays/outputs the time.DATE: Displays/outputs the date.TIME & DATE: Displays/outputs the date and time.OFF: Does not display/output the date and time.LEVEL METER SDI/CAMPBSets whether to display the audio level meter.ON OFFZOOM &FOCUSCAM Sets whether to display the zoom value and focus value.ON OFFCARD &BATTERYSDI/CAMPBSets whether to display the remaining SD Memory Card capacity and theremaining battery capacity.ON OFFOTHERDISPLAYSDI/CAMPBSets the amount of information to display on the LCD monitor screen. (Page 78)ON OFFLCDBACKLIGHTSDI/CAMPBAdjusts the backlight of the LCD monitor. Set to [HIGH] for a brighter backlight.LOW NORMAL HIGHLCD DTL SDI/CAM Emphasizes the edges of the video displayed on the LCD monitor screen.ON OFFLCD SET SDI/CAMPBAdjusts the LCD monitor. (Page 32)LCD COLOR LEVEL: Adjusts the color density of the screen.LCD BRIGHTNESS: Adjusts the brightness of the screen.LCD CONTRAST: Adjusts the contrast of the screen.indicates the factory default setting.