Panasonic AG-HMR10 Operating Instructions Manual

Also see for AVCCAM AG-HMR10: Specifications User guide Specification sheet Brochure & specs Manual

Contents

Panasonic AG-HMR10 Operating Instructions Manual Manual pdf 91 page image

Menu91OPERATIONItem Displaymode Description of settingsDELETE PB Deletes clips.ALL CLIPS: Deletes all clips.SELECT: Deletes only the selected clips. Press the [SHIFT/EXEC] button andthen select [YES] to execute the deletion.NO: Returns to the previous screen.Clips for which protection is set in [CLIP PROTECT] cannot be deleted.•INDEX PB Adds or deletes a clip index.YES: Adds or deletes an index.NO: Returns to the previous screen.CLIP PROTECT PB Protects clips to prevent accidental deletion.YES: Sets clip protection or cancels protection.NO: Returns to the previous screen.Formatting an SD Memory Card (Page 34) will delete all clips even if they are•protected.OTHER FUNCTIONSItem Displaymode Description of settingsUSER SDI/CAMPBSets the function that is assigned to the [USER] button. (Page 41)INH: Nothing is assigned.REC CHECK∗1 : Use to check the final 2 seconds of the video and audio thatwas shot immediately before.SPOTLIGHT∗1 : Switches the auto iris control for the spotlight on or off.BACKLIGHT∗1 : Sets the auto iris control for backlight compensation.ATW LOCK∗1 : Fixes the white balance value when the button is pressed whileATW is set.LCD DTL: Emphasizes the edges of the video displayed on the LCDmonitor screen.LCD REVERSE: While the button is pressed, reverses the image displayed onthe LCD monitor screen horizontally and vertically.INDEX: Adds an index.SHOT MARK∗2 : Adds a shot mark.LAST CLIP: Deletes the last recorded clip.COUNTER∗2 : Switches the counter display. (Press the button for 2 secondsor longer during the counter display to reset the value to zero.)∗1 Setting only available in CAM mode.∗2 In PB mode, only [SHOT MARK] and [COUNTER] are enabled.The content selected under [USER] is set for each mode individually.•CLOCK SET SDI/CAMPBSets the date and time. (Page 31)indicates the factory default setting.(Continued on the next page)