72 Viewfinder Screen Status DisplaysChapter 4 Adjustments and Settings for RecordingChecking and displayingshooting status• Hold down the DISP/MODE CHECK button inrecording standby or during recording to displaythe settings of each shooting function, the list offunctions assigned to USER buttons and all otherinformation. Press again to return to the regularscreen.• Press the DISP/MODE CHECK button duringrecording standby or recording clears all displays.Press again to return to the regular display.• These settings are maintained when the unit isturned off and also when switching media andoperating mode.• Display the following items on the viewfinder andLCD monitor screen by pressing the DISP/MODECHECK button or by configuring OTHER DISPLAY ofthe DISPLAY SETUP screen of the setup menus.Displays MODECHECK DISPLAYAudio dubbingmodeALL PARTIAL OFF1 Time code display ❍ — — — —3 AUTO/MANUAL switchoperation display — ❍ ❍ ❍ ×4 Recording format/recording time display ❍ ❍ ❍ × ×5 Information display ❍ — × × ×6 Squeeze informationdisplay ❍ ❍ ❍ ❍ ×9 Calendar display ❍ ❍ — — —10 Recording/playbackframe rate display ❍ ❍ ❍*1 × ×11 Shutter speed display ❍ ❍ ❍ ❍ ×12 Audio level meter display ❍ ❍ — — —13 IRIS display ❍ ❍ ❍ ❍ ×14 Zoom position display ❍ ❍ — — —15 Auto-IRIS control display ❍ ❍ ❍ ❍ ×16 Media remainingmemory display ❍ ❍ — — —18 Recommended ND filterdisplay ❍ ❍ ❍ ❍ ×19 ND filter display ❍ ❍ ❍ × ×20 Gain display ❍ ❍ ❍ ❍*2 ×21 AWB information display ❍ ❍ ❍ ❍*3 ×23 Scene file name/DUBdisplay ❍ ❍ ❍ × ×24 Media data display ❍ ❍ — — —25 Operating status display ❍ ❍ — — —26 Remaining mediadisplay ❍ ❍ — — —27 Special recordingdisplay ❍ ❍ — — —28 Safety zone display — — — — —29 AWB, ABB error display ❍ × — — —30 Chromatic aberrationcompensation display ❍ × — — —❍: Displayed×: Not displayed—: Displayed depending on other settingsThe item in ❍ in the MODE CHECK space appears when youpress and hold the DISP/MODE CHECK button.The item in ❍ in the DISPLAY space disappears when youpress the DISP/MODE CHECK button.*1 Not displayed when FRAME RATE is set to 60i or 50i.*2 0 dB is not displayed.*3 Only preset 3.2K and 5.6K are displayed.Setting the Marker DisplaysTurn marker display on or off.Select the display mode from the setting menuDISPLAY SETUP screen.For directions on navigating the menu, see [SettingMenu Options].PUSH MENU TO RETURNMARKERSAFETY ZONEDATE/TIMELEVEL MATERZOOMCARD/BATTP2CARD REMAINZEBRA DETECTDISPLAY SETUPOFFONONONON80%90%TOTALYou can also press the USER button to which theMARKER function has been assigned to turn themarker on and off.
