E-69Thumbnail operations (continued)You can perform any of the following operations. Ifnecessary, make preparations prior to undertakingthe operations.Checking clip information• Move the cursor to the clip to be checked.Checking the P2 card information• Insert the P2 card into the unit.Checking the SD memory card information• Insert the SD memory card into the unit.Setting the P2 card memory capacity displayChecking the version of this system1 On the thumbnail screen, press the MENUbutton.A menu now appears. (Page 63)2 Select PROPERTY using the andbutton, and press the (or ) button.3 Select the desired item using the andbuttons, and press the button.CLIP PROPERTY:The information of the selected clip isdisplayed. (See details at right.)CARD STATUS:The P2 card information is displayed. (Page70)DEVICES:The SD memory card information is displayed.(Page 70)PROPERTY SETUP:Set the method of displaying the P2 cardmemory capacity. After selecting P2 CARDCAP, select REMAIN (remaining memory)or USED (memory used), and press thebutton.SYSTEM INFO:The version of the system in this camera isdisplayed.EXIT: Select this to return to the last screen.4 To exit the information screen, press theMENU button, use the button to selectEXIT, and then press the button.Clip information screen1 2 34 51 Clip number2 Thumbnail3 Slot number/dubbing mode display4 Clip informationVarious indicators that have been added tothe clip and also various kinds of data aredisplayed. ( appears if the P2 card is write-protected)CLIP NAME: Clip nameSTART TC: Time code value when recordingstartedSTART UB: User information value whenrecording startedDATE: Date when the recording was madeTIME: Time when recording startedDURATION: Clip lengthV_FORMAT: Video signal formatFRAME RATE: Playback frame rateREC RATE: Recording frame rate• This display appears when recording usinga setting for the FRAME RATE item on theSCENE FILE screen other than the defaultduring 720P/25PN recording operation.5 Clip metadataThe video and audio formats, videographerinformation and other detailed data aredisplayed here.Select the desired item using the andbuttons, and press the button. (For details onthe clip metadata, see page 56.)P2Checking the clip or card information (PROPERTY)
