EditingENGLISHE-7613941394USB 2.0Computer (non-linear editing/file transfer)Hard disk drive (data copying)• For details on the computer’s conditions and other factors, see page 81.Hard disk driveComputer USB cable (optional)• For a Windows computer1394 cable (optional)• For an Apple Macintosh computer1394 cable (optional)Mini-B type4-pin typeFile transfer/nonlinear editing1394AVC transfer/nonlinear editing1394Computer (Windows/Apple Macintosh)1394 cable (optional)4-pin type4-pin type• When controlling this camera from a non-linear editor, cancel the thumbnail screen on the camera.(Page 65)• No guarantees are given for images and audio signals which are output simultaneously from the camera-recorder while data is being transferred from a computer to the camera-recorder.When connecting the unit to an Apple Macintosh computer• Connect the 1394 cable after turning on the power of the Apple Macintosh computer. Otherwise, the unitmay not be mounted.• The unit may not be recognized after the Apple Macintosh computer has been placed in the hibernationstate by its power-saving setting. In this case, disconnect the 1394 cable and then re-connect it.If the unit is not mounted properly on an Apple Macintosh computer• When the P2 card access lamp flashes orange1. Select [Applications] → [Utilities] → and start up [Disc Utility].2. Select a grayed-out volume among volumes of the X.X GB Panasonic disc, and click “Mount.”• When the P2 card access lamp is offEject the P2 card, and insert it again. If the unit is still not mounted, disconnect the 1394 cable and thenre-connect it.(Continued on the next page)
