53 (E)[Setup] initial setting screenThe LCD display now shows the setting screens for each effect pattern. Proceed to set the edges and effects, and if thesettings are acceptable, enter them using [Enter], and return to the direct pattern settings.Example of transitionPos. X 128 Y 128Z 196Event ME Time Pattern INT00E 10:00F 2001 WhtDirect Pattern TransitionEnter to EXITModifyEffectsOffComp OffPatternEdge HardWidth0ColorWhiteIf the setting operation is exited part of the way through (by pressing other buttons, etc.), the settings performed so far will notbe stored in the memory.The settings of six key patterns and seven transitions patterns are stored in the memory. The edges and effects of each ofthe patterns are also stored.Example of key patternPos. X 128 Y 128Z 196Event ME Time Pattern INT00E 10:00F 6301 WhtDirect Pattern KeyEnter to EXITPatternEdgeEffectsOffLightOnCrop AA2881277123DModifyRotate0Time0TransF255HardWidth0ColorWhiteK Level255Key patterns 3xxx, 4xxx and 5xxx as well as key learn patterns 9000 to 9019 can be assigned to direct key pattern buttons.Transition patterns 0xxx, 1xxx and 2xxx can be assigned to direct transition pattern buttons.The factory settings are the patterns displayed.R1 R2 R3 R4 R5R1 R2 R3 R4 R56A