92 (E)ENGLISHOther operations3) Select “File” > “Capture Title” from the menu of theMemory Status screen to read in Title data.Select “File” > “Capture IntVideo” from the menu ofthe Memory Status screen to read in IntVideo data.4) Enter the image format and the file name and click“Save.”When the data to be read in is composed of multipleimages, a number will be automatically appended atthe end of the file name.≥ For saving in of Title data, the image format is fixed toTARGA (32 bit/pixel, with α channel).≥ For saving in of IntVideo data, the image format can beselected as TARGA, JPEG, or BMP (all 24 bits/pixel, no αchannel).≥ Capture the IntVideo data after the IntVideo playback hasbeen stopped at the AG-MX70 main unit.≥ Images cannot be transmitted while the “Loading...”display appears on the LCD screen immediately after theAG-MX70’s power has been turned on or immediatelyafter changes have been made to the image memorysettings.≥ While transmission is in progress, the LCD display of theAG-MX70 shuts down.Recalling eventsAG-MX70 events can be recalled from the PC.1) Select “AG-MX70 setup” from the “Tools” menu of themain window.2) Input the number of the event to be recalled into the“Event Recall” column on the mixer setting window,and click the “Recall” button. The event is nowrecalled.Select the data by left-clicking in the statusdisplay column.Saving dataTitle data or IntVideo data can be read to the PC from theimage memory of the AG-MX70 and can be stored as stillimages. Use the following procedure.1) Select “Tools” > “Memory status” from the menu ofthe main window to open the Memory Status screen.2) Left-click on the data to be read into the PC in thestatus display column of the Memory Status screen.The data changes to selected status (the colour willbecome darker).Transmission and playback of IntVideo dataThe operations for transmission and playback of PC imagesas IntVideo data is described below.1) Select “Tools” > “Memory status” from the menu ofthe main window and open the Memory Statusscreen.2) Select “File” > “Load Intvideo” from the menu of theMemory Status screen.The “Open file” dialog will be opened.3) For transmission of a STILL image to the AG-MX70,select the image and click “Open.”To play back MOVIE images, select the image to beplayed back first from a series of images and click“Open” to display the playback format setting screen.When the playback format and the number of framesto be transmitted have been set and “OK” is clicked,the images will be transmitted to the AG-MX70.4) Left-click the data to be played back in the statusdisplay column on the memory management screen.The data is set to the selected status (status in whichthe colour darkens).5) Select “Operation” > “Preview” from the MemoryStatus screen menu.The data is now played back.≥ Crawl and Roll playback formats cannot be used forIntVideo data.≥ Images cannot be transmitted immediately after the AG-MX70’s power has been turned on or immediately afterchanges have been made to the image memory settings.≥ While transmission is in progress, the LCD display of theAG-MX70 shuts down.≥ Before playback, INT/EXT must be selected by the AG-MX70.Clearing IntVideo dataThe operation for deletion of transmitted IntVideo data fromthe image memory of the AG-MX70 is described below.1) Select “Tools” > “Memory status” from the menu ofthe main window to open the Memory Status screen.2) Left-click the data to be deleted in the status displaycolumn of the Memory Status screen.The data changes to selected status (the colourbecomes darker).3) Select “Operation” > “Clear specified area ” from themenu of the Memory Status screen.The data is cleared.
