93 (E)Other operationsSetting the initial propertiesThe initial values for the properties to be used with new data can be set on the “Initial set of Properties Data” setting screen.1) Select “Properities initial value setting” from the Tools menu of the main window.The “Initial set of Properties Data” setting screen is displayed.2) Set the individual items and click the “OK” button to change the settings.All settings can be returned to the initial value by pressing the “Load Default” button.Still DurationThe duration is set for when Still is used as the dataplayback format.1Movie DurationThe duration is set for when Movie Repeat is used as thedata playback format.2Roll SpeedThe speed is set for when Roll is used as the dataplayback format.3Crawl SpeedThe speed is set for when Crawl is used as the dataplayback format4PositionThe display position is set here. The vertical position isdifferent for NTSC and PAL.X: The horizontal position can be set from 0to 719.Y (NTSC): For NTSC, the vertical position can be setfrom 0 to 480. (Only even numbers.)Y (PAL): For PAL, the vertical position can be setfrom 0 to 576. (Only even numbers.)5ON, OFF settingsThe operation at the time of DSK ON and DSK OFF isset. For further details on each item, refer to “Setting thedata playback properties” (page 87).≥ AutoTrigger (OFF only)When this is checked, the OFF Trigger is set toAuto.≥ EffectThe pattern to be used for special effects and thespecial effects time are set here.≥ SlideThe slide direction and the speed are set here.6123465