24Setup menusUSER menuItem SettingNo. Superimposed No. Superimposed Descriptiondisplay display101 SHTL MAX 0000 ×160001 ×320002 ×60102 FF. REW 0000 ×32MAX 0001 ×600002 ×100103 AUDIO 0000 OFFMUTE 0001 ON104 REF 0000 OFFALARM 0001 ON106 PLAY 0000 0. .. .DELAY . .0015 15107 CAP.LOCK 0000 2F0001 4F109 EJECT EE 0000 EESEL 0001 BLACK0002 GRAY110 F/R EE SEL 0000 EE0001 TAPE111 STOP EE 0000 EESEL 0001 TAPE112 AUTO REW 0000 OFF0001 ONThe underline on the setting item denotes the initial setting.This sets the maximum speed for shuttle operations.0: 16× normal speed1: 32× normal speed2: 60× normal speedWhen a DV or DVCAM cassette is used, the 32× speed will beset even if “×60” has been selected as this item’s setting.This sets the maximum speed for FF and REW operations.0: 32× normal speed1: 60× normal speed2: 100× normal speedWhen a DV or DVCAM cassette is used, the 32× speed willbe set regardless of what has been selected as this item’ssetting.This sets the status until the audio signal is output whenoperation switches from the stop or search modes to the playmode.0: The time until the audio is output is shortened.1: The audio is output after the status stabilizes.When set to 0 (OFF), the sound in the initially output part isincomplete. Therefore, this setting is not recommended forbroadcasts.This selects whether to warn the operator when theREF.VIDEO signal has not been connected.0: Warning is not given.1: Warning is given by the flashing STOP lamp.This set the play delay time in frame increments.This selects the capstan lock mode.0: 2F mode1: 4F modeFor selecting the video and audio output status when the tapeis ejected.0: EE mode1: Video blackens, audio mutes.2: The images appear in gray, and the sound is muted.This selects whether EE mode or playback mode is to be usedduring FF/REW operations.0: EE mode1: Playback modeThis selects whether EE mode or playback mode is to be usedduring stop mode.0: EE mode1: Playback modeThis setting is complied with even in the standby OFF mode.However, the images will appear in gray when “TAPE” hasbeen selected.This selects whether to rewind the tape automatically to thetape start when the tape end is detected.0: The tape stops at the tape end.1: The tape is rewound to the tape start.
