Panasonic AJ-D455 Menu Information

Also see for AJ-D455: Operating instructions

Contents

34Setup menusUSER menu

(continued)Item SettingNo. Superimposed No. Superimposed Descriptiondisplay display612 WIDE 0000 AUTOSELECT 0001 WIDE0002 NORMAL613 VIN SETUP 0000 THRU0001 CUT620 Pb/Pr OUT 0000 MIILV 0001 B-CAMThe underline on the setting item denotes the initial setting.This selects the operation to be conducted in response to theWIDE information.0: During recording, if the S1-VIDEO input signals containWIDE information, the WIDE information is recorded on thetape.During playback, if WIDE information is on the tape, it isadded to the S1-VIDEO output signals.1: During recording, the WIDE information is recorded on thetape regardless of whether the S1-VIDEO input signalscontain the WIDE information.During playback, the WIDE information is added to the S1-VIDEO output signals regardless of whether the WIDEinformation is on the tape. → Forced WIDE ON2: During recording, the WIDE information is not recorded onthe tape regardless of whether the S1-VIDEO input signalscontain the WIDE information.During playback, the WIDE information is not added to theS1-VIDEO output signals regardless of whether the WIDEinformation is on the tape. → Forced WIDE OFFThis item is effective during recording at the start of therecording and during playback at all times. Therefore, when itssetting has been changed during recording, the MENUcontents will be changed but no change will occur in the actualoperation.This selects whether the composite signal is to be recordedwith setup or without setup.0: When recording signals with no setup.1: When recording signals with 7.5% setup.When recording composite signals, be sure to double-checkwhether the signals are to be recorded with or without setup.For selecting the analog component output level.0: MII level1: Betacam level

/ 24

Related manuals for Panasonic AJ-D455