22Setup menusUSER menuItem SettingNo. Superimposed No. Superimposed Descriptiondisplay display000 P-ROLL 0000 0S. .. .TIME . .0005 5S. .. .. .0015 15S001 CHARA 0000 0. .. .H-POS . .0004 4. .. .. .0016 16002 CHARA 0000 0. .. .V-POS . .0018 18. .. .. .0022 22003 DISPLAY 0000 TIMESEL 0001 T&STA0002 T&S&M0003 T&RT0004 T&YMD0005 T&MDY0006 T&DMY004 LOCAL 0000 DISENA 0001 ST&EJ0002 ENAThe underline on the setting item denotes the initial setting.This sets the preroll time which can be set from 0 to 15 secondsin 1-second increments.The unit will not operate if the preroll time is set to 0 secondswhen the unit is set to automatic editing (PREVIEW, AUTOEDIT COMMAND) from an external controller.This sets the position of the characters on the horizontal planefor the time code and other super displays output to theVIDEO OUT 3/SERIAL OUT 3* connector.When setting this item, the DISPLAY SEL status is output toVIDEO OUT 3/SERIAL OUT 3* even if SUPER OFF has beenset. However, when the menu is exited, operation complieswith the SUPER OFF/ON setting.Also, CHARA TYPE is output to VIDEO OUT 3/SERIAL OUT 3*according to the status set in the menu.This sets the position of the characters on the vertical planefor the time code and other super displays output to theVIDEO OUT 3/SERIAL OUT 3* connector.1. When setting this item, the DISPLAY SEL status is outputto VIDEO OUT 3/SERIAL OUT 3* even if SUPER OFF hasbeen set. However, when the menu is exited, operationcomplies with the SUPER OFF/ON setting.Also, CHARA TYPE is output to VIDEO OUT 3/SERIALOUT 3* according to the status set in the menu.2. When the DISPLAY SEL setting causes characters toextend beyond the edges of the screen, the setting value ischanged so that the characters are automatically displayedin a position on the screen.For selecting the time code and/or other information which is tobe shown on the superimposed display at the VIDEO OUT 3/SERIAL OUT 3* connector.0: Time only1: Time and operation mode2: Time, operation mode and mode3: Time and REC TIME4: Time and REC DATE (year/month/day)5: Time and REC DATE (month/day/year)6: Time and REC DATE (day/month/year)1. The mode display is DVCPRO during DVCPRO playback,DV during DV playback, and DVCAM during DVCAMplayback.2. When 2 (T&S&M) is set, an error message will appearwhen a warning or error has occurred.3. REC TIME and REC DATE are displayed during DV orDVCAM playback only. The operation mode is displayedduring DVCPRO playback.This selects the buttons which can be operated on the frontpanel when the REMOTE/LOCAL switch has been set toREMOTE.0: No buttons can be operated.1: Only the STOP and EJECT buttons can be operated.2: All buttons can be operated.* The SERIAL OUT 3 con-nector functions onlywhen the AJ-YA455Pserial interface board(optional accessory) isused.
