Controls and their functions– 14 –$9 ENCODER CONTROL switchThis selects whether the adjustments to the video output signals are to be performed bythe unit or by an external encoder/remote controller.REMOTE: The adjustments to the video output signals are performed by the externalencoder/remote controller.LOCAL: The adjustments to the video output signals are performed by the unit.%0 VIDEO LEVEL control and switchWhen the ENCODER CONTROL switch is at LOCAL, the video level can be adjusted.When it is at PRESET, the video level is set to the unity value (0 dB).When it is at MANUAL, the video level can be adjusted using this control.%1 CHROMA LEVEL control and switchWhen the ENCODER CONTROL switch is at LOCAL, the chroma level can be adjusted.When it is at PRESET, the chroma level is set to the unity value (0 dB). When it is atMANUAL, the chroma level can be adjusted using this control.%2 SET UP control and switch (Composite output only variable.)When the ENCODER CONTROL switch is at LOCAL, the setup level can be adjusted.When it is at PRESET, the setup level is set to the unity value (0 IRE). When it is atMANUAL, the setup level can be adjusted using this control.%3 HUE control and switch (Composite output only variable.)When the ENCODER CONTROL switch is at LOCAL, the hue can be adjusted. When it isat PRESET, the hue is set to the unity value (0°). When it is at MANUAL, the hue can beadjusted using this control.%4 CF switchThis selects whether the playback framing is to be locked in 8/4-field increments or 2-fieldincrements.8F/4F: The framing is locked in 8/4-field increments.2F: The framing is locked in 2-field increments.Switching to 8F or 4F is enabled by the SETUP menu No. 107 (CAP.LOCK) setting.%5 SYNCHRONIZE switchThis selects whether to provide phase synchronization between two decks.ON: Phase synchronization is provided. Error-less editing can be performed.OFF: Phase synchronization is not provided. The edit point will be off by several frames,but editing can be performed quickly.%6 TC generator switchREGEN: When the REGEN/PRESET switch is at REGEN, the internal time codegenerator is synchronized with the time code which the time code readerread from the tape. Whether to set TC or UB to REGEN can be selected atthe setup menu No. 503 (TCG REGEN).PRESET: When the REGEN/PRESET switch is at PRESET, presetting is enabled bythe controls on the operation panel or by remote control.REC RUN: The time code runs only during recording when the RUN MODE switch hasbeen set to REC. The time code runs constantly when the REGEN/PRESETswitch is set to REGEN.FREE RUN: The time code runs regardless of the operation mode as long as the poweris being supplied when the RUN MODE switch has been set to FREE.
