Panasonic AJ-FX216 Operating Instructions Manual

Contents

-11-3. TITLE DISPLAYThis parameter lets you decide whether or not tohave the title displayed.1. Move the cursor to the TITLE DISPLAY parameter.* MENU 2 OF 3 *TITLE SETUP *TITLE POSITION *TITLE DISPLAY ONSTILL/ALARM DISP ON2. Select ON or OFF.ON: Title displayOFF: No title displayThe factory setting is ON.4. STILL/ALARM DISPThis parameter lets you decide whether or not tohave the word “STILL” displayed when a picture ispaused by pressing button 16 (STILL ON), or theword “ALARM” when the unit receives the alarmsignal.1. Move the cursor to the STILL/ALARM DISP parame-ter.2. Select ON or OFF.ON: “STILL” and “ALARM” are displayed.OFF: “STILL” and “ALARM” are not displayed.The factory setting is ON.* MENU 2 OF 3 *TITLE SETUP *TITLE POSITION *TITLE DISPLAY ONSTILL/ALARM DISP ON1. BORDERThis parameter lets you select the colour of the bor-ders that divide the screen.1. Move the cursor to the BORDER parameter.2. Select the colour of the borders.OFF: No bordersBLACK: Black bordersGRAY: Grey (Gray) bordersWHITE: White bordersThe factory setting is WHITE.2. AUTO SKIPThis parameter lets you select automatic skipping ofchannels to which no camera is connected.1. Move the cursor to the AUTO SKIP parameter.C. Setting up MENU 3 OF 3 inMULTIPLEX modeThe content of MENU 3 OF 3 in MULTIPLEX modeis as shown below.* MENU 3 OF 3 *BORDER WHITEAUTO SKIP OFFSEQUENCE SETUP *START SCREEN 1-SEQSYSTEM MODE MULTIPLEX* MENU 3 OF 3 *BORDER WHITEAUTO SKIP OFFSEQUENCE SETUP *START SCREEN 1-SEQSYSTEM MODE MULTIPLEX* MENU 3 OF 3 *BORDER WHITEAUTO SKIP OFFSEQUENCE SETUP *START SCREEN 1-SEQSYSTEM MODE MULTIPLEX2. Select ON or OFF.ON: Channels to which no camera is connected areskipped.OFF: No channels are skipped.The factory setting is OFF.