Panasonic AJ-FX216 Operating Instructions Manual

Contents

-5-13. Recording Output Connector (REC OUT)This connector supplies the recording signal for thetime lapse VTR.Caution:In MULTIPLEX mode, the unit adds codes tovideo signals during vertical blanking while theyare recorded on the VTR. This is the reasonwhy video signals with a certain code are notrecordable during vertical blanking.14. Monitor Output Connector (MONITOR OUT)This connector supplies a composite video signalfor monitoring. Sequential picture, time lapse VTRplayback pictures and the menus can be displayedon a connected monitor.15. Camera Switching Signal Input Connector(CAMERA SW IN)The camera switching signal from the time lapseVTR is supplied to this connector. This connectorworks only when the MULTIPLEX mode is selected.Note:When REC MODE is set to T/L but no cameraswitching signal is supplied, time lapse record-ing will not work properly.16. ALARM/REMOTE ConnectorThis connector is used for remote controlling. Youcan control the following functions:• Alarm Output• Recover Input• MULTISCREEN• SEQ• Receiving the alarm input signal at the camerasite, or the remote input signal for the cameraselection buttons.17. Ground Terminal18. Power Cord