Panasonic AJ-FX216 Operating Instructions Manual

Contents

-19-Note: Two or more pictures on the monitor can beselected in multi picture mode.6. Press the camera selection button whose indicatoris blinking.The selected picture is displayed again for normalmonitoring.7. To release STILL ON mode, set the MODE SELECT/CAMERA SELECT switch to MODE SELECT, thenpress button 16 (STILL ON).The STILL ON indicator goes out.Notes:• If you press the camera selection button for a cam-era whose picture is not displayed on the monitorscreen, the operation is ignored.• The word “STILL” is not displayed if STILL/ALARMDISP in MENU 2 OF 3 is set to OFF.• While the still picture is displayed, the VTR keepsplaying the playback picture.E. Single Spot Picture ZoomThe following function is available in single spot pic-ture mode only.1. Repeat procedures A (Single Spot Picture) to moni-tor the playback picture.2. Set the MODE SELECT/CAMERA SELECT switch toCAMERA SELECT.3. Press the ZOOM/MULTISCREEN/QUAD SHIFTbutton.The “+” sign appears in the picture.Note: The “+” sign disappears if no operation isperformed within approx. 5 seconds.4. Press button 14 (+) to zoom in, or button 13 (–) tozoom out.Notes:• Each time button 14 (+) is pressed, the pictureis zoomed in. Zooming stops when it reachesthe maximum level.• The picture cannot be zoomed out to be small-er than the original size by pressing button 13(–).5. To move the picture, press buttons 9 - 12 (DD, CC,AA, BB). The zoomed picture will move up, down,left, or right depending on the button pressed.The picture will stop at the edge of the monitorscreen.Normal Playback PicturePlayback Picture with the "+" signZoomed Playback PictureENTRANCENotes:• In monitoring single spot playback pictures, onlyone zoom level is available.• The title in the picture disappears when theZOOM/MULTISCREEN/QUAD SHIFT button ispressed. The title remains off the screen even afterthe “+”• sign disappears.To call the title back on the screen, quit the zoomfunction and operate another function.