31SYSTEMItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settings“ ” indicates the factory setting.15 VO SYS H (SD) 0000:0858:1716–858:0:858For adjusting the system phase of the VIDEO output signals (in 37 ns increments).–: The phase is advanced.+: The phase is delayed.The setting range is –864 to 0 to 864 when 50i/25P, 25 (HD) or 25 (SD) is selectedas the menu item No.25 [SYSTEM FREQ] setting.16 SD SYS H (SD) 0000:0858:1716–858:0:858For adjusting the system phase of the SD SDI output signals (in 37 ns increments).–: The phase is advanced.+: The phase is delayed.The setting range is –864 to 0 to 864 when 50i/25P, 25 (HD) or 25 (SD) is selectedas the menu item No.25 [SYSTEM FREQ] setting.18 SCH COAR (SD) 0000000100020003090180270For adjusting the SCH (sub-carrier to horizontal) phase of the VIDEO outputsignals (4 positions in 90-degree increments).The SC phase changes, and the H phase remains unchanged.19 SCH FINE (SD) 0000:0032:0064–32:0:32For adjusting the SCH (sub-carrier to horizontal) phase of the VIDEO outputsignals (variable range of over ±45 degrees).The SC phase changes, and the H phase remains unchanged.A range of ±180 degrees is covered by using this setting in combination with itemNo.18 [SCH COAR(SD).20 AV PHASE 0000:0100:0200–100:0:100For adjusting the phase of the AUDIO output signals in relation to the VIDEOoutput signals (in 20.8 μs increments).–: The phase of the audio output signals is advanced in relation to the video outputsignals.+: The phase of the audio output signals is delayed in relation to the video outputsignals.Setup menus12 SYS H (HD) 0000:1100:2200–1100:0:1100For adjusting the system phase of the HD SDI output signals (in 13.5 nsincrements).–: The phase is advanced.+: The phase is delayed.The setting range is as follows:O –1320 to 0 to 1320 when 50i/25P, 25 (HD) or 25 (SD) is selected as theSYSTEM FREQ settingO –1375 to 0 to 1375 when 23/24 is selected as the SYSTEM FREQ setting14 SYS SC (SD) 0000:0108:0216–108:0:108For adjusting the system phase of the VIDEO output and SD SDI output signals(total variable range of over ±180 degrees).–: The phase is advanced.+: The phase is delayed.
