Panasonic AJ-HD1200A Operating Instructions Manual

Also see for AJHD1200A - DVCPRO HD VTR: Operating instructions

Panasonic AJ-HD1200A Operating Instructions Manual Manual pdf 33 page image

33001 LOCAL ENA000000010002DISST&EJENAFor setting the buttons on the front panel which can be operated when theLOCAL/MENU/REMOTE switch is at the REMOTE position.0: None of the buttons can be operated.1: Only the STOP and EJECT buttons can be operated.2: All of the buttons with the exception of COUNTER and RESET can be operated.002 TAPE TIMER00000001±12h24hFor setting how the time is to be displayed on the CTL counter display.0: 12-hour display1: 24-hour display003 REMAIN SEL0000000100020003OFF2L1LR/TTLFor setting the superimposing of the remaining tape time and/or total tape durationdisplays onto the VIDEO OUT2 connector.0: No displays are superimposed.1: The remaining tape time is displayed on the second line.2: The remaining tape time is displayed on the first line.3: The remaining tape time is displayed on the first line and the total tape durationon the second line.O The information will not be displayed when 2L is set and TIME is selected as themenu item No.006 [DISPLAY SEL] setting.O The remaining tape time will not be displayed when R/TTL is set and TIME isselected as the menu item No.006 [DISPLAY SEL] setting.005 SUPER00000001000220003200042000520006OFFCMPSTCMPNT2SDSDI2HDSDI2CPS&SD2CPN&HDFor setting the superimposing of the displays onto various connectors.0: The displays are superimposed onto none of the output connectors.1: The displays are superimposed onto VIDEO OUT2.2: The displays are superimposed onto the HD component output (Y).3: The displays are superimposed onto SD SDI OUT.4: The displays are superimposed onto HD SDI OUT.5: The displays are superimposed onto VIDEO OUT2 and SD SDI OUT.6: The displays are superimposed onto the HD component output (Y) and HD SDIOUT.BASICItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settings“ ” indicates the factory setting.Setup menusEven when OFF is selected as the menu item No.005 [SUPER] setting, the superimposing will be displayed inaccordance with what is set using menu item No.006 [DISPLAY SEL] during the menu settings. Once the menusettings are exited, the display follows the setting selected for menu item No.005 [SUPER].2 This appears when the AJ-YA120AG (optional accessory) has been installed.