– 40 –Automatic editingModifying the edit points1 Re-entering the edit pointsSearch for the new edit point by performing the jog or shuttle operation, and press theIN (or OUT) and SET buttons together to re-enter the edit point.2 Modifying the edit point in frame units (trim function)Press the TRIM button while holding down the IN (or OUT) button.The edit point is put ahead by 1 frame each time the + button is pressed.The edit point is put back by 1 frame each time the – button is pressed.3 Resetting the edit points3-1 Resetting both the edit IN and OUT points• Press the RESET button.3-2 Resetting either the edit IN or OUT point• Press the RESET button while holding down the IN (or OUT) button.• Edit points can be reset only in the CTL mode.• An edit OUT point can be reset even while editing is in progress.• The IN and OUT points are automatically reset during the eject mode.ONAUDIO CH SELECT SHIFT ADJTC SET STARTTC/CTLRESETTC INTTCTAPEUBSTAND BYEDIT PLAYREW STOPSERVORECFFREC INHIBITPLAYEREXT EEMODEREMOTE PUSHREV FWDRECORDERLOCALCONTROLCH 11ASMBLPREVIEWREVIEW AUTO EDIT PREROLL TRIMAININ SET OUTAOUTMULTICUE INSERTVIDEO CH1/5 CH2/8 CH3/7 CH4/8 CUE TCCH 4OFFPOWERCH CONDITION ENTER ESCAPE SHIFTMETERFULL/FINEMONITOR SELECTLEVELHEADPHONESCH 1/5 CH 2/6 CH 3/7 CH 4/8 CUERECLRPBPULL FOR VARIABLEPULLOPEN PULLOPENCH 5 CH 82 3 4 5 6 7 8JOG SHTLSLOWEJECTM - cassette / ADAPTERCaution: Do not insert S-cassette without adapter2 13- 1, 3-2