29V VT TR R1 2Detailed description of set-up menusTAPE PROTECTItem SettingDescription of settingNo. Item No. Item400 STILL 0000 0.5sTIMER 0001 5s0002 10s0003 20s0004 30s ™ ™0005 40s0006 50s0007 1min0008 2min401 SRC 0000 STEPPROTECT 0001 HALF™ ™402 DRUM STDBY 0000 OFF0001 ON ™ ™403 STOP 0000 STEPPROTECT 0001 HALF™ ™The underlined number and item are the factory settings.DETAILED DESCRIPTION OF SET-UP MENUSThis selects the time taken before the tape protection mode is establishedwhen the laptop has been left standing in the stop or search STILL(JOG/VAR/SHTL) mode.(Units: s: seconds min: minutes)In the case of the DV format, the time will remain at 10 seconds even if avalue higher than 10 seconds has been selected. However, operation will lastfor up to 2 minutes on the selection screen.This selects the operation in the tape protection mode when the laptop hasbeen left standing in the STILL mode.0: STEP (STEP FWD in STILL mode)1: Half loadingWhen STEP FWD has been selected, operation is automatically transferredto half loading after the laptop has been left standing in the STILL mode for atotal of 30 minutes with the DVCPRO format or for a total of 1 minute with theDV format.This selects whether the drum is to be stopped in the standby OFF mode.0: The drum is stopped.1: The drum keeps rotating.This selects the tape protection mode when the unit is left standing in the stopmode.0: Step FWD1: Half-loadingWhen step FWD has been selected, the mode will be automatically trans-ferred to half-loading when the unit has been left standing in the stop modefor a total of 30 minutes (or 1 minute for a DV tape).