Panasonic AJ-LT85P Operating Instructions Manual

Also see for AJLT85P - DVC PRO: Operating instructions

[1] Liquid-crystal monitor sectionq Audio monitor speakerThe VTR1 (or VTR2) monitor sound is heard through thisspeaker. Depending on the position selected by theSPEAKER/HEADPHONES switch, the VTR1 and/orVTR2 sound is selected and output.w COUNTER/REMAIN switchThis selects the VTR1 display tube contents. When it isswitched between the COUNTER and REMAIN positions,the on-screen (OSD) display position is switched. (Top,bottom and OFF)Each time the switch is pressed, the display is switchedas shown below.e EXT CHECK buttonWhile this button is held down, the external input of VTR1can be checked. The level meter of the display section isset to the fine mode.r BRIGHTNESS controlThis is used to adjust the brightness of the VTR1 liquid-crystal display.t LCD switchThis controls the power to the VTR1 LCD monitor andselects the brightness of the backlight.LIGHT: For making the backlight brighter.DARK: For making the backlight dimmer.OFF: For turning off the LCD.y LEVEL controlThis is used to adjust the output level of the built-inspeakers and headphones.u TOTAL button (for VTR2 only)While this button is held down, the total editing time fromthe edit start point to the current editing program appearson the display counter.CONTROLS AND THEIR FUNCTIONS5Controls and their functionsThe description of the VTR2 display is exactly the sameas that for the VTR1 display.VTR 1 VTR 2Display 1: VTR1liquid-crystalmonitorDisplay 2: VTR2liquid-crystalmonitor1267453EJECT: Press this to eject the tape in VTR1.The tapes in both VTR1 and VTR2 can beejected by pressing this button at the sametime as ALL STOP.EJECT: Press this to eject the tape in VTR2.The tapes in both VTR1 and VTR2 can beejected by pressing this button at the sametime as ALL STOP.[2] Counter display(see page 6)TCR 00:00:04:14SHTL + 0.0TCR 00:00:04:14SHTL + 0.0TCR 00:00:04:14 01:02CounterdisplayNo displayRemainingtapedisplayCounterdisplayVTR modedisplayTCR 00:00:04:14SHTL + 0.0TCR 00:00:04:14 TCR 00:00:04:14Counterdisplay* The display shown above appears on the LCD monitor only whenset-up item No.001 (LCD SUPER) is set to ON.