Panasonic AJ-LT85P Operating Instructions Manual

Also see for AJLT85P - DVC PRO: Operating instructions

EVENT EDITING50Registering eventsEvents are registered in sequence from event No.01 to 99, 00.How to register events• Auto editingPress the AUTO EDIT button.After editing has been executed, the numbers are automatically incremented by 1.• Registering an event without executing editingPress the STORE (SHIFT+REC) buttons.The event numbers are incremented by 1.When an unregistered event number (displayed as “n”) is registered:The next event number is displayed.• When an event number is accessed and the edit data is revised, the data which has been revised is registered in the eventnumber concerned.• When an event is accessed and editing is executed without further ado, the event number remains unchanged.When “00” appears as the event number:This signifies the one hundredth event.The overwrite mode (all clear) or overwrite prohibited mode is established depending on the EDL auto clear setting (set-up itemNo.309 “EDL AUTO CLR”).• When EDL AUTO CLR is OFFThe overwrite prohibited mode is established.“FULL” appears instead of the event number. When any function button is pressed, the event number is returned to “00” andthe status which results when the edit data for event No.00 is accessed is established.• When EDL AUTO CLR is ONThe overwrite mode is established.The event number appears as “n00,” and the registered edit data is cleared. A new event can now be registered.--- ----------------------EJECTV T R 1POWERRECCH1 RESETRECDIAGREMOTEEXT VTRLOCAL-VTR1 VTR2CONTROLONOFFRECINHIBITOFF ONCH2PBAUDIO LEVELREW FFSTOP STB OFF TRACKPLAY STILL1ST EDITBSEVENTSPLITASMBLIN OUTVTR1 VTR2 VTR1 VTR2PREROLLSYNCHRO753CFONOFFCH1MIXCH2V1V1•2V2SWAPNORMMIXAUDIOMONITOR SPEAKER/HEADPHONES AUDIOSWAPDUMP LOAD EDLCLEARFSRECALLLASTEDITV A1 A2 TCPLAYIN OUTGO TOENTRY / SHIFTEDIT MODECOUNTERCTLTCUBVTR1EJECTV T R 2RESETRECSTORESTOP STB OFFMENUEDITSTILL REW FFVTR2RECCH1 CH2OPERATION MODE VTR2 AUDIOINPUT SELECTEDITINTEXTSEPARATE CH1 CH2VTR1EXTPBAUDIO LEVELPREVIEWREVIEW MULTIAUTO EDIT ALL STOP*When event editing is performed in the CTL mode,the error may accumulate causing the edit points todeviate considerably. It is therefore recommendedthat event editing be performed in the TC mode.