33Setup menus (continued)No./Item Description No./Item DescriptionUSER menu 880DIF SPEEDThis sets the transfer rate of theIEEE1394 digital interface output.0000 S100 : 100 Mbps0001 S200 : 200 Mbps0002 S400 : 400 Mbps881DIF TYPE(For AJ-SD255P)This sets the format when theIEEE1394 digital signals are output.0000 DVCPRO :The signals are forcibly output in theDVCPRO format.0001 DV :The signals are forcibly output in theDV format.0002 AUTO :The same format as that of theplayback tape is set.882DIF IN CHThis sets the IEEE1394 digital inputchannel.0-63: These channels are fixed toassigned values.0064 AUTO :The channel is not fixed to assignedvalues. When the power is turned on,the input channel is initialized to 63.0000 0: :0063 63883DIF OUT CHThis sets the IEEE1394 digital outputchannel.0-63: These channels are fixed toassigned values.0064 AUTO :The channel is not fixed to assignedvalues. When the power is turned on,the output channel is initialized to 63.0000 0: :0063 63886DIF CONFIGThis menu item is used to supportfuture expansion. Normally, “DFLT” isused as the setting.0000 DFLT0001 1: :0255 255889DIF AUD IN(For AJ-SD255P)This selects the channels to be usedfor recording on the tape when DVformat data with audio signals in the4CH mode are to be input and thenrecorded on a DVCPRO tape.0000 CH1&2 :Received DV format data CH1 andCH2 are selected.0001 CH3&4 :Received DV format data CH3 andCH4 are selected.891DIF DV AUDIOThis sets the forced audio modeconversion when a DV tape is playedand its signals are output in the DVformat.0000 THRU : Normal (through)0001 LOCK :The audio mode is forcibly convertedto the LOCK mode. (The frequency isnot converted.)0002 LOCK48 :The audio mode is forcibly convertedto 48 kHz/2CH/LOCK.890DIF AUD OUT(For AJ-SD255P)This selects the channels when a DVtape with audio signals in the 4CHmode is played and the signals areoutput in the DVCPRO format or whenLOCK48 has been selected as thesetup menu item No.891 (DIF DVAUDIO) setting.(For AJ-SD255E)When setup menu No. 891 (DIF DVAUDIO) is set to LOCK48, this selectsthe output channels for playing backthe DV tape with audio signals in 4CHmode.0000 CH1&2 :DV tape CH1 and CH2 are selected.0001 CH3&4 :DV tape CH3 and CH4 are selected.The underlined items indicates the initial setting.YAD255GYAD255GYAD255GYAD255GYAD255GThis appears only when the optional boardAJ-YAD255G has been installed.YAD255GYAD255GYAD255GYAD255G
