Panasonic AJ-SD255 Operating Instructions Manual

Also see for AJ-SD255 - Professional Editing Video Cassete recorder/player: Menu information

36Time code/user bit (continued)Superimpose screenThe control signals, time code, etc. are displayed usingabbreviations.TCR : : :TCR : : : TCR : : :Abbreviations:CTL : Control signal count valueTCR : Time code data recorded in the SBC areaTCR. : Time code data recorded in the VAUX areaUBR : User bit data recorded in the SBC areaUBR.: User bit data recorded in the VAUX areaTCG : Time code data of the time code generatorUBG : User bit data of the time code generatorCharacters displayedThe background of characters superimposed on the display can bechanged using setup menu No. 011 (CHARA TYPE).TCR : : :TCR : : :Display positionThe position of the characters superimposed on the displaycan be changed using setup menus No. 009 (CHARA H-POS) and No. 010 (CHARA V-POS).TCRSTOP: : :Operation modeThe VTR’s operation mode can also be displayed usingsetup menu No. 008 (DISPLAY SEL).TV monitorTV monitorTV monitorTV monitor TV monitorTV monitorVTR operation modeINT(REGEN/PRESET)EXTTCG switch– – –LTCVITCSetup menuNo. 505EXT TC SELSetup menuNo. 514VITC GENSelected video inputsignalOFF Internal TCG valueTimecode on IEEE1394digital input (VAUX area)VITC on input video signal 3Timecode from TIME CODEIN connector input 1Timecode on IEEE1394digital input (VAUX area)VITC on input video signal 3Timecode on IEEE1394digital input (VAUX area)VITC on input video signal 3Timecode on IEEE1394 digital input (SBC area)VITC on input video signal 2Timecode on IEEE1394digital input (SBC area)VITC on input video signal 2SBC area VAUX areaRecorded timecodeInternal TCG valueTimecode from TIME CODE IN connector input 1Timecodes recorded by this product1: The internal TCG value is used when the signal cannot be detected from the TIME CODE IN connector input.2: The internal TCG value is used when the VITC cannot be detected on the input video signal.3: Nothing is recorded if the VITC cannot be detected on the input video signal.– – –ONOFFOFF1394Y PB P R /S-VIDEO/CMPST/SDI1394Y PB P R /S-VIDEO/CMPST/SDI1394Y PB P R /S-VIDEO/CMPST/SDI1394Y PB P R /S-VIDEO/CMPST/SDION– – –ONNote:[T R], [T R.], [U R] or [U R.] is displayed whenthe data has not been read correctly from the tape.