Panasonic AJ-SDX900E Operating Instructions Manual

Also see for AJ-SDX900E: Service manual

Contents

Panasonic AJ-SDX900E Operating Instructions Manual Manual pdf 10 page image

10Chapter 2 Parts and their functionsCONTENTS2-2 Audio function section (input system)1235679; :<= >? @481 MIC IN (microphone input) jack (XLR, 3-pin)Connect the microphone (optional accessory) here. Thepower for the microphone is supplied from this jack.A stereo microphone can also be used by installing astereo microphone jack (XLR, 5-pin; optional accessory)here.3 AUDIO SELECT CH1/CH2 (audio channel 1 &2 automatic/manual level adjustmentselector) switchThis is used to select the method for adjusting therecording levels of audio channels 1 and 2.AUTO: Set here for automatic adjustment.MAN: Set here for manual adjustment.2 AUDIO LEVEL CH1/CH2 (audio channel 1 & 2recording level adjustment) controlsWhen the AUDIO SELECT CH1/CH2 switch 3 is set toMAN, the recording level of audio channels 1 and 2 can beadjusted using these controls.These controls come with a locking mechanism: when theyare to be adjusted, push them in at the top part to releasethe mechanism.4 AUDIO IN (audio input selector) switchThese are used to select the input signals to be recordedon audio channels 1, 2, 3 and 4.FRONT: The input signals supplied from themicrophone which has been connectedto the MIC IN jack 1 are recorded.W.L. (wireless): The input signals from the slot-inwireless microphone receiver arerecorded.REAR: The audio input signals supplied fromthe audio component which has beenconnected to the AUDIO IN CH1/CH2connectors 5 are recorded.5 AUDIO IN CH1/CH2 (audio input channel 1 &2) connectors (XLR, 3-pin)An audio component or microphones are connected here.6 LINE/MIC/+48V (line input/mic input/micinput + 48V) selector switchThis is used to switch the audio input signals from theaudio component which has been connected to the AUDIOIN CH1/CH2 connectors 5.LINE: The audio input signals from the audio componentserving as the line input are selected.MIC: The audio input signals from the internal powersupply type of microphone are selected. (Thephantom mic power is not supplied from the unit.)+48V: The audio input signals from the external powersupply type of microphone are selected. (Thephantom mic power is supplied from the unit.)7 Wireless receiver slotThe UniSlot® wireless receiver (optional accessory) canbe attached here.8 FRONT AUDIO LEVEL (audio recording leveladjustment) controlThis enables the recording level of audio channels 1 and 2to be adjusted. This level can be adjusted regardless ofthe setting position of the AUDIO SELECT switch.When the screen is opened from the VTRMENU page by performing a menu operation, whether toenable or disable the operation of this level control can beset using the FRONT VR CH1 and FRONT VR CH2setting items.