Panasonic AJ-SDX900E Operating Instructions Manual

Also see for AJ-SDX900E: Service manual

Contents

Panasonic AJ-SDX900E Operating Instructions Manual Manual pdf 98 page image

98Chapter 7 Menu description tablesCONTENTS7-8-6 MIC/AUDIO2WIRELESS WARN ONOFFFor selecting whether or not to outputwarnings when the reception of the wirelessreceiver is poor.Item Variablerange RemarksFRONT MICPOWERONOFFFor selecting the phantom power supply forthe front microphone.REAR MIC POWER ONOFFFor selecting the phantom power supply forthe rear microphone.AUDIO OUT ONOFFFor setting the audio output circuit.OFF: The power to the output circuit is shutdown, and the signals of the circuit arenot output.ON: The signals of the audio output circuitare output.MONITOR SELECT STEREOMIXFor selecting the format of the signals to beoutput to the monitor.FRONT MIC LEVEL –40dB–50dBFor selecting the input level of the frontmicrophone.REAR MIC CH1LVL–50dB–60dBFor selecting the input level of the rearmicrophone.REAR MIC CH2LVL–50dB–60dBFor selecting the input level of the rearmicrophone.REAR LINE IN LVL 0dB+4dBFor selecting the rear line input level.AUDIO OUT LVL 0dB+4dBFor selecting the rear audio output level.HEADROOM 18dB20dBFor setting the headroom (reference level).7-8-7 TC/UBItem Variablerange RemarksUB MODE USERTIMEDATEEXTTCGFRM RATEREGENFor selecting the UB mode.USER: Selects the UB value set in theLCD section.TIME: Selects the local time (hour,minute, second).DATE: Selects the local date and time(last 2 digits of year, month, date,hour)EXT: Sets the UB from the TC-IN as theslave. The user value is retained ifno value can be read.)TCG: Inputs the TCG value unchanged.FRM RATE: Selects the same camera shootingdata (frame rate, etc.) as theVAUX UB (VITC UB).REGEN: Reads the value recorded on thetape and then continues to recordfrom that value.TCG SET HOLD ONOFFFor selecting ON or OFF for the function thatwithout fail uses what was previously set asthe TCG value for recording when the TCGvalue had been set before the power wasturned off and recording was then performedafter the power was turned back on again.FIRST REC TC REGENPRESETFor selecting whether or not to regenerate thetime code as the value on the tape during thefirst recording after the power was turned on,the cassette was inserted or a playback orsearch operation was performed.P.OFF LCDDISPLAYONOFFFor selecting whether or not to set the LCD’stime code and display its count while thepower is off.ON: The time code can be set anddisplayed even while the power is off.OFF: While the power is off, the power to theLCD section is turned off, and the timecode can be neither set nor displayed.TC OUT TCGTCG/TCRFor selecting the TC OUT output.TCG: The time code generator value isalways output.TCG/TCR: The time code generator value isoutput with the E-E setting and thetime code reader value is output withthe V-V setting.The underlining in the variable range column indicates the setting in the preset mode.