Panasonic AJ-SDX900E Operating Instructions Manual

Also see for AJ-SDX900E: Service manual

Contents

Panasonic AJ-SDX900E Operating Instructions Manual Manual pdf 81 page image

817Chapter 7 Menu description tablesCONTENTSMg (SAT/PHASE) –63:+00:+63For performing the magenta color correction(saturation and hue).R (SAT/PHASE) –63:+00:+63For performing the red color correction(saturation and hue).R-Mg (SAT/PHASE) –63:+00:+63For performing the color correction (saturationand hue) between red and magenta.Mg-B (SAT/PHASE) –63:+00:+63For performing the color correction (saturationand hue) between magenta and blue.7-3-3 COLOR CORRECTIONItem Variablerange RemarksCy (SAT/PHASE) –63:+00:+63For performing the cyan color correction(saturation and hue).Cy-G (SAT/PHASE) –63:+00:+63For performing the color correction (saturationand hue) between cyan and green.G (SAT/PHASE) –63:+00:+63For performing the green color correction(saturation and hue).G-Yl (SAT/PHASE) –63:+00:+63For performing the color correction (saturationand hue) between green and yellow.Yl (SAT/PHASE) –63:+00:+63For performing the yellow color correction(saturation and hue).Yl-R (SAT/PHASE) –63:+00:+63For performing the color correction (saturationand hue) between yellow and red.B-Cy (SAT/PHASE) –63:+00:+63For performing the color correction (saturationand hue) between blue and cyan.B (SAT/PHASE) –63:+00:+63For performing the blue color correction(saturation and hue).7-3-4 LOW SETTINGMATRIX TABLE OFFABFor selecting the color correction table.COLOR CORRECT ONOFFFor selecting ON or OFF for the colorcorrection.Item Variablerange RemarksMASTER GAIN –3dB:0dB:30dBFor setting the master gain to –3, 0, 3, 6, 9,12, 15, 18, 21, 24, 27 or 30 dB.H.DTL LEVEL 00:28:63For performing the H.DTL LEVEL setting.V.DTL LEVEL 00:12:31For performing the V.DTL LEVEL setting.DTL CORING 00:02:15For performing the DTL CORING setting.H.DTL FREQ. 00:20:31For performing the H.DTL FREQ setting.LEVEL DEPEND. 01:5For performing the LEVEL DEPEND setting.MASTER GAMMA 0.35:0.45:0.75For setting the MASTER GAMMA in 0.01steps.BLACK STRECH –3:OFF:+3For setting the gamma curve of the darkareas.The underlining in the variable range column indicates the setting in the preset mode.