897Chapter 7 Menu description tablesCONTENTS7-5-4 USER SWItem Variablerange RemarksUSER MAIN SW INHS.GAINDS.GAINS.IRISI.OVRS.BLKB.STRAUDIO CH1AUDIO CH2REC SWY GETRET SWATWD.ZOOMFor allocating the USER MAIN switchfunction.USER1 SW INHS.GAINDS.GAINS.IRISI.OVRS.BLKB.STRAUDIO CH1AUDIO CH2REC SWY GETRET SWATWD.ZOOMFor allocating the USER1 switch function.USER2 SW INHS.GAINDS.GAINS.IRISI.OVRS.BLKB.STRAUDIO CH1AUDIO CH2REC SWY GETRET SWATWD.ZOOMFor allocating the USER2 switch function.7-5-5 SW MODEECU DATA SAVE ONOFFON: The settings controlled by the ECU arestored in the memory when the ECU isdisconnected from the camerarecorder.OFF: No camera related settings are storedin memory.Item Variablerange RemarksRET SW RECCHECKCAM RETFor selecting the RET switch function.REC CHECK: The REC CHECK operation isperformed.CAM RET: The return signal output operationis performed.S.BLK LVL OFF–10–20–30For setting the super black level.AUTO KNEE SW ONOFFFor selecting whether or not the AUTO KNEEswitch is to be used.SHD,ABB SW CTL ONOFFFor selecting whether or not digital darkshading is to be activated by pressing theABS switch for a prolonged time (at least 8seconds).COLOR BARS SMPTEFULLBARSSPLITARIBFor selecting the color bars to be used.SMPTE: SMPTE color barsFULL BARS: Full color barsSPLIT: SPLIT color barsARIB: ARIB mult-format color barsS.GAIN OFF L/M/HS.GAINFor selecting the method used to release thesuper gain mode.L/M/H: The mode is released by making achange in the L/M/H switch position.S.GAIN: The mode is released using onlythe S.GAIN switch (USER switch).DS.GAIN OFF L/M/HDS.GAINFor selecting the method used to release thedigital super gain mode (cumulative gain).L/M/H: The mode is released by making achange in the L/M/H switch position.DS.GAIN: The mode is released using only theDS.GAIN switch (USER switch).D.ZOOM SEL ZOOMFOCUSFor selecting the method used to executedigital zooming.ZOOM: Digital zooming is available for useat all times.FOCUS: Digital zooming is executed for about5 seconds as a focus assist function.However, if recording is initiated at apoint within the 5 seconds, theD.ZOOM function is forciblyreleased.The underlining in the variable range column indicates the setting in the preset mode.