48Chapter 4 Adjustments and settings for recording4-9-2 Setup card operationsTo format the setup card, save the setting data on the card orread the saved data from the card, first perform a menuoperation to open the screen from theFILE page.Formatting the setup card#< CARD READ/WRITE >R.SELECT :1READW.SELECT :1WRITECARD CONFIGTITLE READTITLE:1: ******** 5: ********2: ******** 6: ********3: ******** 7: ********4: ******** 8: ********CONFIG?YES# NOCONFIG OK1 Perform the menu operations, and display the “CARDREAD/WRITE” screen.2 Turn the JOG dial button to move the arrow (cursor) tothe CARD CONFIG item.4 To proceed with the formatting of the setup card, turn theJOG dial button to move the arrow (cursor) to YES, andpress the JOG dial button. When the formatting of thecard is completed, the following message appears.5 Press the MENU button to exit the menu operations.The setting menu is cleared, and the displays showingthe unit’s current statuses appear at the top and bottom ofthe viewfinder screen.Data titles cannot be recognized when the setup card wasinserted while the CARD READ/WRITE screen was open.Move the arrow (cursor) to the TITLE READ item, andpress the JOG dial button.The data title is recognized, and the title is displayed.3 When the JOG dial button is pressed, the followingmessage appears on the screen.If one of the following messages appears when the JOG dial button ispressed, the card will not be formattedError message Remedial actionCONFIG NG NO CARD(setup card has not been inserted)Insert the card.CONFIG NG ERROR(the card cannot be formatted)The card may be defective.Replace it.Saving the data settings on the card1 Perform the menu operations, and display the “CARDREAD/WRITE” screen.2 Turn the JOG dial button to move the arrow (cursor) tothe W.SELECT item and press the JOG dial button.3 Turn the JOG dial button to select a number from 1 to 8,and press the JOG dial button.Selecting the file No.< CARD READ/WRITE >R.SELECT :1READ# W.SELECT :1WRITECARD CONFIGTITLE READTITLE:1: ******** 5: ********2: ******** 6: ********3: ******** 7: ********4: ******** 8: ********CONFIG NGWRITE PROTECTRemove the card to cancel writeprotect.
