Panasonic AJ-SDX900p Operating Instructions Manual

Also see for AJSDX900 - 24P DVCPRO 50: Software guide

Contents

Panasonic AJ-SDX900p Operating Instructions Manual Manual pdf 86 page image

86Chapter 7 Menu description tables7-4-2 VF MARKERItem Variablerange RemarksTABLE ABFor selecting the VF MARKER setting table.This item is used to set the current values oftable A or B which have been selected usingthe menu items listed below.CENTER MARK OFF1234For selecting the center marker.OFF: The center marker is not displayed.1: + (large)2: Center blank (large)3: + (small)4: Center blank (small)SAFETY ZONE OFF12For selecting the type of safety zone frame.OFF: The safety zone frame is not displayed.1: Box2: Corner framesSAFETY AREA 80%:90%:100%For setting the position of the safety zone.FRAME SIG 4:313:914:9VISTAFor setting the frame marker.Note that this setting takes effect only whenREC MODE is set to 16:9.The VISTA setting is 16:8.65.FRAME MARK ONOFFFor selecting ON or OFF for the framemarker.FRAME LVL 00:15For setting the level of the frame marker.0: Equivalent to signal OFF15: Same brightness as center areaHowever, this setting has no effect ifFRAME SIG is set to VISTA.USER BOX ONOFFFor setting whether or not to display the userbox.7-4-3 USER BOXItem Variablerange RemarksUSER BOX WIDTH 001:013:100For setting the horizontal width of the userbox.USER BOXHEIGHT001:013:121For setting the vertical height of the user box.USER BOX H POS –50:+00:+50For setting the horizontal position of the userbox center.USER BOX V POS –121:+000:+121For setting the vertical position of the user boxcenter.7-4-4 VF INDICATOR1Item Variablerange RemarksEXTENDER ONOFFFor selecting ON or OFF for the extenderdisplay.SHUTTER ONOFFFor selecting ON or OFF for the shutter speeddisplay.FILTER ONOFFFor selecting ON or OFF for the filter No.display.WHITE ONOFFFor selecting ON or OFF for the AWBPRE/A/B display.GAIN ONOFFFor selecting ON or OFF for the currentlyselected gain, S.GAIN and DS.GAIN display.IRIS OFFIRISS+IRISSOFF: Neither the super iris ON status northe aperture value is displayed.IRIS: Only the aperture value is displayed.S+IRIS: Both the super iris ON status andaperture value are displayed.S: The super iris ON status is displayed.(The display or non-display of the aperturevalue and that of the iris override are linked.)CAMERA ID BARCAMALWAYSOFFFor setting the ID configuration duringrecording.BAR: The ID is recorded when color barsignals are provided.CAM: The ID is recorded when the cameraimages are provided.ALWAYS: The ID is recorded at all times.OFF: The ID is not recorded at any time.ID POSITION UPPER RUPPER LLOWER RLOWER LFor setting the location where the camera IDis to be recorded.UPPER R: Top rightUPPER L: Top leftLOWER R: Bottom rightLOWER L: Bottom leftZOOM LVL ONOFFFor selecting ON or OFF for the zoomposition display.COLOR TEMP ONOFFFor selecting ON or OFF for the colortemperature display.CAMERA MODE ONOFFFor selecting ON or OFF for the camera’soperation mode display.DATE/TIME ONOFFFor specifying whether or not the date andtime are mixed simultaneously when theCAMERA ID is recorded.The underlining in the variable range column indicates the setting in the preset mode.