1322-2 Audio (input) Function SectionMIC IN (microphone input) jack (XLR, 3-pin)A microphone (optional accessory) is connected here.Power for the microphone comes from this jack.A remote microphone may be connected. In this case, thepower supply to the appropriate connector must be enabledthrough menu option FRONT MIC POWER or REAR MICPOWER.These options are found in the screen onthe MAIN OPERATION page.A stereo microphone may be connected, but you will need toreplace the connector. For more information, contact yourdistributor or designated service provider.AUDIO LEVEL CH1/CH2 (audio channel 1 & 2recording level adjustment) controlsWith the AUDIO SELECT CH1/CH2 switch positioned to[MAN], these controls can be used to adjust the recordinglevels for Audio Channels 1/2.Note that the controls are designed to be locked. Foradjustment, each control must be depressed while turning.AUDIO SELECT CH1/CH2 (audio channel 1 & 2 automatic/manual level adjustment selector) switchUse this switch to select recording level control mode forAudio Channels 1 and 2.AUTO: Recording level automatically controlled.MAN: Recording level manually controlled.AUDIO IN (audio input selector) switchUse this switch to select the signals recorded through AudioChannels 1 - 4.FRONT: Signal from the microphone connected to theMIC IN jack is recorded.W.L. (WIRELESS)Signal from the slot-in wireless receiver isrecorded.REAR: Signal from the audio device connected to theAUDIO IN CH1/CH2 connector is recorded.When you use stereo microphone (AJ-MC900G optional),set both CH1 and CH2 to [FRONT]. The signal from L CH isrecorded to CH1 and that from R CH to CH2.AUDIO IN CH1/CH2 (audio input channel 1 & 2)connectors (XLR, 3-pin)Audio devices or a microphone may be connected here.LINE/MIC/+48V (line input/mic input/mic input +48V) selector switchUsed to select the audio signal input from the AUDIO INCH1/CH2 connectors.LINE: Audio signal line-input from the audio device isinput.MIC: Audio signal from a self-powered (active)microphone is input. (The main unit does not supplypower to the remote microphone).+ 48V: Audio signal from a passive microphone is input.(The unit supplies power to the remote microphone).Wireless slotA Unislot wireless receiver (optional accessory) may beattached here.FRONT AUDIO LEVEL (audio recording leveladjustment) controlThis control adjusts the recording levels for Audio Channels1 and 2. Level adjustment does not depend on the positionof the AUDIO SELECT switch.The control can be enabled or disabled through the menuoptions FRONT VR CH1 or FRONT VR CH2. These optionscan be found in the screen on the MAINOPERATION page.ᤨࠫDownloaded From CamcorderManual.com Panasonic Manuals
