Panasonic ANUP5204 User Manual
                                                  | |
Contents
| 
ANUP5204 AicureInstallation165. InstallationInstall the Aicure ANUP5204 under the conditions above.5-1. Installation OrientationThe Aicure ANUP5204 offers two orientations: a space-saving vertical illumination (upright) orientation,and a horizontal illumination (sideways) orientation that allows stacking. You must change themounting orientation of the magnet inside the main unit, in accordance with the installation orientation.See 4-1. Installing the Magnet (p. 10) for details.Be sure to set the magnet in accordance with the installation orientation. Mounting themagnet in a different position could cause the lamp to shatter, or shorten its lifetime.5-2. Installation Conditions1) Ambient temp.: 10 to 40o C2) Relative humidity: No greater than 80%, with no condensation3) Make sure the rubber legs are set horizontally parallel.4) In order to avoid damage due to overheating, do not use if the areaaround the system is blocked, or with two systems back to back.5) The dimensions of the main unit are 165 x 200 x 325 mm(LxHxD), but you should take the state of the unit with a lightguide fiber unit attached into account.6) The minimum allowable bending radius for the light guide fiberunit is 50 mm. Using the unit with a curve radius of less than 50mm could damage it. Additionally, you should not touch the endof the light guide directly with your bare hands. If it becomessoiled, the level of UV light will be decreased.Warning |
Related manuals for Panasonic ANUP5204
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine