Panasonic ANUP5204 User Manual

Panasonic ANUP5204 User Manual Manual pdf 27 page image

ANUP5204 AicureIrradiation278-3 Pattern IrradiationIf you need to change the UV intensity over time, you can do so automatically by registering a patternthat changes the UV intensity and irradiation time.There is a mode that allows you to select freely between four UV intensities; this modeis available via external signals only. See 9-2. Operation via External Signals for details.Registering a PatternYou can register patterns of up to 10 steps. You can register up to 9 patterns, numbered 0 through 8.For each step, you can set an irradiation time (timer value) and UV intensity.Sample Pattern 1・ Steps are executed in order, from 0 to 9.・ At each step, irradiation is performed at the set UV intensity. After the set time has elapsed,execution proceeds to the next step.Sample Pattern 2・ To end irradiation before a given step number, set the timer value of the step before the final stepto "0.0".For example, say you want to perform irradiation in four steps, 0 to 3. You would then set the timervalue for step 4 to 0.0.Warning