ANUP5204 AicureReplacing the Lamp4011. Replacing the LampTake note of the following when replacing the lamp:1. Turn off the power, and unplug the power cord (after the lamp is turned off, coolingis performed for about 20 minutes, so be sure to turn off the power until the rearcooling fan stops running).2. Immediately after the lamp is turned off, it is still hot. Wait at least 10 minutes after pulling out thepower cord before starting work, in order to allow the lamp to cool.Replace the lamp when its lifetime is reached. After replacing the lamp, you must reset the cumulativelamp use time.11-1. Replace the LampDo not touch the lamp with your bare hands. Use clean gloves or gauze when installingthe lamp.1 Remove the lamp's replacement knurl nut.2 Loosen 1 bolt, and remove the lamp cover on top of themain unit.3 Remove the knurl nut holding the lamp in place, andremove the lamp lead wire from the lamp.Lift up the lamp mounting bracket.WarningWarningLampKnurl nutLamp mountingbracketLampKnurl nutLamp lead wire