Panasonic AW-RP501 Operating Instructions Manual

Also see for AWRP501 - HYBRID CONTROL PANEL: Operating instructions Service manual

Contents

-30-• Total Pedestal AdjustmentTotal pedestal adjustment is made to adjust thepedestals of two or more cameras. Using an oscillo-scope or a waveform monitor, adjust the pedestals to 5IRE (0.035 V) or 7.5 IRE (0.050 V) with T.PED Control!9.T. P E D C A B L E C O M PY CT. PED Control5 IRE (0.035 V) or7.5 IRE (0.050 V)4. White Balance Setting• White balance adjustment is necessary when using thecamera for the first time, or if the camera has not beenused for a long period of time.• Once the white balance is adjusted, no readjustment isnecessary if the camera is used under the same condi-tions.• Automatic White Balance Control (AWC)The color temperature conditions for two channels Aand B can be stored in the memory in advance. Oncethe white balance is adjusted, all that is needed is toselect either AUTO/ATW A Switch o or AUTO/ATW BSwitch !0 if the camera is used under the same condi-tions. No readjustment is necessary. If the white bal-ance is readjusted, the existing white balance data isreplaced with new data.q Press either AUTO/ATW A Switch o or AUTO/ATW Bswitch !0.w Pick up a white object (a white wall or white handker-chief, for example) fully on the screen. Be careful tokeep a shiny or bright object out of the screen.e When AWC Switch !1 is pressed, Auto Set Indicator !3flashes and the white balance is automatically adjust-ed. It goes out when it has been properly adjusted. Ifthe adjustment fails, Auto Set Indicator !3 remains lit.In such a case, change the brightness, iris, object, lightsource, etc. and adjust it again.