Panasonic AW-RP50E Operating Instructions Manual

Also see for AW-RP50E: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Panasonic AW-RP50E Operating Instructions Manual Manual pdf 13 page image

12 (E)ENGLISHParts and their functions Control panelPOWER ALARM F1 CAMERAOSDR/B GAIN R/B PEDSYSTEMSETUPCAMERASCENE/MODEDETAILDELETESTOREPAGEMENU F2 EXITUSER2USER1PT ACTIVEAUTOIRISAUTOHILOWPTZ/FOCUS SPEED PAN/TILTFOCUS/PUSH OTAFTELEZOOMWIDECAMERA STATUS / SELECTIONPRESET MEMORY / MENUGAIN/PEDF2F11 2 3AWB/ABB4SHUTTER51 2 3 4 56 7 8 9 10  POWER indicator [POWER]This indicator lights when the POWER switch() on the rear panel is set to ON while power issupplied to the DC IN socket. ALARM indicator [ALARM]This indicator lights when there is a problem withthe power supply (voltage drop).It also lights when an alarm (a cooling fan alarmor pan/tilt error) has been received from a remotecamera. Refer to “Checking the equipment alarminformation” (Operating Instructions).When the alarm indicator has lit, stop using the unitimmediately, and be absolutely sure to contact yourdealer.Continuing to use the unit even after an alarm hasoccurred may cause the unit to malfunction.The alarm information can be output to an externaldevice from the unit’s TALLY/GPI connector (). LCD panelThe current setting statuses are displayed on thispanel. F1 dial, F2 dial [F1, F2]These dials are turned to change the menu values,and they are pressed to enter the changes thathave been made.The F1 dial is used to operate the items displayedat the top of the LCD panel, and the F2 dial is usedto operate the items displayed underneath.What appears on the on-screen displays of theremote cameras and how operations are performeddiffer depending on the camera type. Refer to “Operating the menu items of theselected remote camera” (Settings> Operating Instructions). CAMERA OSD button [CAMERA OSD]When the CAMERA OSD button is held down, itsindicator lights, and the on-screen menu of theselected remote camera is displayed as the outputimage of the remote camera.When the button is held down again while itsindicator is lit, the menu is cleared, and the indicatorgoes off.