Panasonic AW-RP50E Operating Instructions Manual

Also see for AW-RP50E: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Panasonic AW-RP50E Operating Instructions Manual Manual pdf 39 page image

38 (E)ENGLISHSpecificationsPower requirements: DC 12 V 10 %(AC adapter provided)Current consumption: 0.5 A (DC 12 V) GENERALAmbient operating temperature:0 °C to +40 °CAllowable humidity ranges:10 % to 90 % (no condensation)Mass:Approx. 1.1 kgDimensions (W  H  D):210  67  177 mm[excluding protrusions] Input/Output connectorLAN (RJ-45):10BASE-T/100BASE-TXConnecting cable: LAN cable, max. 100 meters When the unit is connected via a switchinghub:Straight cable (category 5 or above), STP(Shielded Twisted Pair) cable recommended When the unit is connected directly:Crossover cable (category 5 or above), STP(Shielded Twisted Pair) cable recommendedTO PAN/TILT HEAD (RJ-45):RS-422 (control signals for remote cameras)Connecting cable:Straight cable (category 5 or above)max. 1000 metersTALLY/GPI (D-sub 15-pin, female, inch thread):TALLY IN:5 inputs (for receiving photocoupler signals)GPI IN:4 inputs (for receiving photocoupler signals)GPI OUT:4 outputs (open collector outputs, negative logic)indicates safety information. AC adapterInput:AC 100 V to 240 V, 1.5 A, 50/60 HzOutput:DC 12 V, 2.5 A, 30 WMass and dimensions shown are approximate.Specifications are subject to change without notice.