Panasonic BT-LH900 Operating Instructions Manual

Also see for BT-LH900: Brochure & specs

Panasonic BT-LH900 Operating Instructions Manual Manual pdf 7 page image

7Parts and their functionsVIDEO OUT connectorThe video signals are output from this connector.Signals are passed through the 9 VIDEO IN connectorand output from this connector.:; SDI input connectorsThe SDI input signals are supplied to these connectorswhich support automatic HD/SD switching.< SDI output connectorThe SDI signals are output from this connector. It is theswitched output of the ; SDI input connectors.The signals displayed on the screen, whether they arethe ones supplied to the SDI 1 connector or SDI 2connector, are output.However, the switched output signals are not outputwhen the component or video input signals have beenselected.> External DC power socketThe external DC power source is connected here. Whena DC power supply is connected concurrently with thebattery, the external power input takes precedence.@ Light control switchThis is not used on this monitor.? Tripod fastening screwsTwo screws (UNC3/8-16 compatible) for securing atripod are provided each on the top of the monitor and atits bottom where the main controls are removed.A removable screw spacer is provided in one of thescrew holes in the bottom of the monitor, and thissupports a UNC1/4-20 screw. To secure the tripod, usethe hole that fits the diameter of the fastening screw onthe tripod.= Power switchThis is the power switch.7 GPI connectorWhen GPI signals are connected here, externaloperations can be performed.8 RS-232C connectorExternal operations can be performed under the RS-232C standard.9 VIDEO IN connectorThe video input signals are supplied to this connector.Y/G VIDEOINOUTSDI 1INSDI 2INSWITCHEDOUTPB/BPR/RSYNCCONTROLGPIRS-232CPOWERDC IN567 89:;<=>4?? @5 Analog component/RGBS connectorsThese are the BNC input connectors for the analogcomponent (Y/Pb/Pr) or RGBS signals. When RGBsignals are supplied, external sync (gen-lock) can alsobe used.4 Battery holderThis holder is used with a battery made by Anton Bauer.6 Main controls dedicated connectorThe cable from the main controls is connected here.The monitor is shipped with the cable disconnected fromthe connector. Prior to use, therefore, check out theshape of the cable connector and plug it properly into thisconnector.