Panasonic CF-52 Series Reference Manual

Also see for CF-52 Series: Supplementary guide Supplementary guide Supplementary instructions Getting started guide Supplementary instructions

10Sleep and Hibernation FunctionsIn sleep *3 or hibernationz Do not attach or remove a multimedia pocket device and peripheral devices. Doing so may cause malfunction.z Power is consumed in sleep *3 . Power consumption may increase when a PC Card is inserted. When power isexhausted, the data retained in memory will be lost. Connect the AC adaptor when using the sleep *3 function.z Do not turn on/off the wireless switch. To resume from sleep*3 or hibernation1 Open the display, or press the power switch (A).z In the default setting, the Windows password will be requested to resume.z When [Stand by] or [Hibernate] is selected as the setting for [When I close the lid ofmy portable computer] (Î page 7), you can resume operation opening the display.CAUTIONz Do not perform the following operations until resuming is complete. After the display is resumed, wait approximately30 seconds (normally) or 60 seconds (when the computer is on a network).• Touch the keyboard (except for password input), touch pad or power switch.• Use an external mouse or other peripheral devices.• Connect or disconnect the AC adaptor.• Close or open the display.• Shut down or restart Windows.• Enter sleep *3 or hibernation (Wait approximately 1 minute).• Operate the wireless switch.• Insert and remove the SD Memory Card.z If the computer enters sleep*3 while a USB keyboard or mouse is connected, touching the USB keyboard keys ormouse will resume the computer.NOTEz After resuming from sleep or hibernation, the message “TosBtMng has stopped working” may appear.Click [Close program].If Bluetooth connections are cut off, click (Start)*5 - [All Programs] - [Bluetooth] - [Bluetooth Settings], and connectto the Bluetooth devices again.*3 Windows XP: standby*4 If the speakers are muted, beeps do not sound.*5 Windows XP: [start]