Panasonic CF-52 Series Reference Manual

Also see for CF-52 Series: Supplementary guide Supplementary guide Supplementary instructions Getting started guide Supplementary instructions

75Wireless LAN1 Click on the notification area and click or .2 Click [802.11a Enabled] or [802.11a Disabled].NOTEz In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard is restricted by law.z The Wireless Switch Utility icon ( or ) indicates the on/off status of wireless LAN and/or Bluetooth and/or wire-less WAN, not the setting of IEEE802.11a.z If IEEE802.11a is enabled or disabled while the computer is connected to an IEEE802.11b/g access point, the connec-tion will be temporarily interrupted.z You can also change the IEEE802.11a setting in [Device Manager].AClick (Start) - [Computer] - [System properties] - [Device Manager].z A standard user needs to enter an administrator password.Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].B Double-click [Network adapters] and double-click [Centrino(R) Advanced-N 6200 AGN].C Click [Advanced], and then select [Wireless Mode] in [Property].D Select the settings in [Value].E Click [OK].If you enable or disable 802.11a using the pop-up menu of Wireless Switch Utility, the setting in [Device Manager] willbe accordingly changed as below.Enabling/Disabling the Wireless LAN Standard IEEE802.11a (802.11a)Settings in Device Manager Settings in Wireless Switch UtilityWhen 802.11a is enabled When 802.11a is disabled[6. 802.11a/b/g][4. 802.11b/g][802.11a, 802.11b and 802.11g][802.11b and 802.11g] a+b+g is enabled b+g is enabled[3. 802.11g][5. 802.11a/g][802.11g only][802.11a and 802.11g] a+g is enabled g is enabled[1. 802.11a][2. 802.11b][802.11a only][802.11b only] a is enabled b is enabled