Panasonic CF-52 Series Reference Manual

Also see for CF-52 Series: Supplementary guide Supplementary guide Supplementary instructions Getting started guide Supplementary instructions

11Security MeasuresUse these features to protect your data.z Other security measure• Embedded Security (TPM) (Î page 85): For further information, refer to the Installation Manual of “Trusted PlatformModule (TPM)”.Set the Supervisor Password before setting the User Password.1 Start up the Setup Utility (Î page 79).2 Select [Security].3 Select [Set Supervisor Password] or [Set User Password], and press Enter.4 Enter your password in [Create New Password] and press Enter.z When the password has been set, you need to enter your password in [Enter Current Password] and pressEnter.z To disable the password, leave the input field empty and press Enter.5 Enter your password again in [Confirm New Password] and press Enter.6 Press F10, and then select [Yes] and press Enter.CAUTIONz Do not forget your password. If you forget your Supervisor Password, you will not be able to use your computer. Con-tact Panasonic Technical Support.z When running the Setup Utility, do not leave and go away from your computer even for a short time, since other peoplemay set or change the password.NOTEz The password will not be displayed on the screen.z You can use up to 32 alphanumeric characters (including spaces).• The case (upper/lower) is ignored.• Use only the upper horizontal row of numeric keys to input your password.• You cannot use Shift and Ctrl to input a password.z Disabling the Supervisor Password also disables the User Password.Setting the Supervisor Password/User Password